Home > Products > Battery, inverter, controller,tower > 2kw 3kw 5kw 10kw 20kw 30kw customized wind solar hybrid controller
2kw 3kw 5kw 10kw 20kw 30kw customized wind solar hybrid controller
- 1000 per Month
- T/T Credit Card
- Wind grid tie inverter 5kw 3.5kw 10kw 20kw
- pure sine wave inverter 10kw 20kw 30kw 50kw 100kw with 2 phase /3 phase output
- wind power grid tie inverter 1.5kw 2kw 3kw 3.6kw 5kw
- wind generator on grid inverter 20kw
- split phase pure sine wave inverter 10kw 20kw 30kw 50kw 100kw
- MPPT wind power on grid inverter 2kw 3kw 5kw 10kw 15kw 20kw 30kw 50kw 100kw
Product Description
Wind turbine charge controller with dump load, wind generator charge controller, wind power off grid system charge controller
US$260.00/set 2kw PWM wind solar hybrid controller with dump load
1. Normal controller for wind turbine, low cost
wind turbine auto-controller is special matched equipment with wind turbine. It commutates the AC that generated by wind turbine to DC and then charges to storage battery groups.
Auto-controller with a beautiful appearance, simplify indication, easy operation, has an auto-protection function in case of battery converse connection; auto-shunt in case of heavy wind (unload). The wind turbine shut down automatically when the battery group voltage get to 125%; and startup automatically when the voltage drop to 108%. The key component adopts the high-efficient chip control, the complete machines is intelligent. This system is running safely, steadily, and reliably, working efficiently and have a long work life, which is proved by a large number of experiments.
Wind power (W) |
300 |
300 |
500 |
500 |
500 |
1000 |
Solar panel power (Wp) |
50 |
100 |
100 |
100 |
100 |
150 |
Matching battery groups(V) |
12 |
24 |
12 |
24 |
48 |
48 |
Working method |
Continuous |
|||||
Function |
Charge |
|||||
Working Environment |
Temperature: -10-40℃ Humidity ≤80% |
|||||
Wind Turbine unload voltage (V) |
15±1 |
30±1 |
30±1 |
30±1 |
60±1 |
60±1 |
Wind Turbine Stop voltage (V) |
15±1 |
30±1 |
30±1 |
30±1 |
60±1 |
60±1 |
Wind Turbine restore charge voltage (V) |
13±1 |
26±1 |
26±1 |
26±1 |
54±1 |
54±1 |
Wire provide for oneself (mm²) |
>6 |
>4 |
>10 |
>4 |
>4 |
>4 |
Charge insurance (A) |
30 |
25 |
63 |
30 |
30 |
30 |
Wind power (W) |
2000 |
2000 |
3000 |
3000 |
5000 |
Solar panel power (Wp) |
100 |
500 |
150 |
200 |
200 |
Matching battery groups(V) |
24 |
48 |
48 |
120 |
240 |
Working method |
Continuous |
||||
Function |
Charge |
||||
Working Environment |
Temperature: -10-40℃ Humidity ≤80% |
||||
Wind Turbine unload voltage (V) |
30±1 |
60±1 |
60±1 |
150±2 |
300±2 |
Wind Turbine Stop voltage (V) |
30±1 |
60±1 |
60±1 |
150±2 |
300±2 |
Wind Turbine restore charge voltage (V) |
26±1 |
54±1 |
54±1 |
135±2 |
270±2 |
Wire provide for oneself (mm²) |
>16 |
>10 |
>16 |
>4 |
>4 |
Charge insurance (A) |
100 |
63 |
100 |
32 |
32 |
2. PWM charge controller with dump load spec
PWM Controller Characteristics
The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users’ technical requirements.
- The big screen LCD display. Clearly present the working status of the wind turbine, solar panel, battery and controller.(Wind turbine voltage, current, power display ;solar voltage, current, power display, battery charging current, voltage, charging power, power display.)
- Two sets of control systems:PWM constant voltage system and three-phase dump load system.
- PWM constant voltage control is 120% of the rated power of the wind turbine . In case exceeding of PWM’s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.
- Under the circumstances of disconnecting or damage of the battery, the three-phase dump load will start automatically to avoid the idling for wind turbine and the occurrence of runaway accident.
- Under the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.
- The protection function of reverse connection, disconnection and damage-resisting of the battery will be applied.
- Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.
- Auto recharging of battery: When the battery voltage reduces to 108% of the rated voltage,it stops three-phase dump load to recharge battery automatically.
- For the different wind turbine type, the controller can be equipped with mechanical yawing, furled empennage, mechanical or hydraulic, pneumatic, electric magnetic and other brake functions.
- The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On the other way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.
- Ammeter and voltmeter indication: Indicate the charging current and voltage of the battery.
- The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.
- Optional communication Mode:RS232,RS485,GPRS,USB,RJ45 ect, Can monitor multiple devices running.
Type |
500W-24Vdc |
500W-48Vdc |
500W-12Vdc |
Wind turbine rated power |
500W |
500W |
500W |
Wind turbine max. power |
1KW |
1KW |
1KW |
Solar panel |
200Wp |
200Wp |
200Wp |
Battery |
24Vdc |
48Vdc |
12Vdc |
Function |
Rectifier,charge, control |
||
Display mode |
LCD |
||
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
||
PWM constant pressure voltage |
>28Vdc |
>56Vdc |
>14Vdc |
3-phase load voltage of the wind turbine |
29±1Vdc |
58±1Vdc |
15±1Vdc |
wind turbine Recovery charging voltage |
27±1Vdc |
54±1Vdc |
13.5±1Vdc |
Solar stop charge voltage |
29±1Vdc |
58±1Vdc |
15±1Vdc |
Solar pane Recovery charging voltage |
<28Vdc |
<56Vdc |
<14Vdc |
Low-voltage of the battery |
20±1Vdc |
40±1Vdc |
10±1Vdc |
Self-provided connecting wire of the battery |
>20mm² |
>10mm² |
>10mm² |
PWM fuse |
100A |
40A |
50A |
Solar fuse |
16A |
10A |
25A |
Charging fuse |
125A |
63A |
80A |
Work environment temperature |
-30-60°C |
||
Relative humidity |
<90% No condensation |
||
Noise (1m) |
<40dB |
||
Degree of protection |
IP20(Indoor) |
||
Cooling method |
Forced air cooling |
||
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
Size of the controller (mm) |
480*360*23 |
480*360*230 |
480*360*230 |
Weight of the controller |
12Kg |
10Kg |
12 Kg |
Size of the load (mm) |
395*300*125 |
395*300*125 |
395*300*125 |
Weight of the load |
5.5Kg |
5.5 Kg |
5.5Kg |
1kw PWM controller spec:
Type |
1KW-24Vdc |
1KW-48Vdc |
1KW12V |
Wind turbine rated power |
1KW |
1KW |
1KW |
Wind turbine max. power |
2KW |
2KW |
2KW |
Solar panel |
300Wp |
300Wp |
300Wp |
Battery |
24Vdc |
48Vdc |
12Vdc |
Function |
Rectifier,charge, control |
||
Display mode |
LCD |
||
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
||
PWM constant pressure voltage |
>28Vdc |
>56Vdc |
>14Vdc |
3-phase load voltage of the wind turbine |
29±1Vdc |
58±1Vdc |
15±1Vdc |
Recovery charging voltage of the wind turbine |
27±1Vdc |
54±1Vdc |
13.5±1Vdc |
Solar stop charge voltage |
29±1Vdc |
58±1Vdc |
15±1Vdc |
Solar recovery charging voltage |
<28Vdc |
<56Vdc |
<14Vdc |
Low-voltage of the battery |
20±1Vdc |
40±1Vdc |
10±1Vdc |
Self-provided connecting wire of the battery |
>8mm² |
>6mm² |
>16 mm² |
PWM fuse |
63A |
25A |
100A |
Solar fuse |
16A |
10A |
40A |
Charging fuse |
63A |
32A |
125A |
Work environment temperature |
-30-60°C |
||
Relative humidity |
<90% No condensation |
||
Noise (1m) |
<40dB |
||
Degree of protection |
IP20(Indoor) |
||
Cooling method |
Forced air cooling |
||
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
Size of the controller (mm) |
480*360*230 |
480*360*230 |
480*360*230 |
Weight of the controller |
12Kg |
11Kg |
12 Kg |
Size of the load (mm) |
395*300*125 |
395*300*125 |
395*300*125 |
Weight of the load |
5.5 Kg |
5 Kg |
5.5Kg |
2kw PWM controller normal spec:
Type |
2KW-24Vdc |
2KW-48Vdc |
2KW-96Vdc |
Wind turbine rated power |
2KW |
2KW |
2KW |
Wind turbine max. power |
4KW |
4KW |
4KW |
Solar panel |
600Wp |
600Wp |
600Wp |
Battery |
24Vdc |
48Vdc |
96Vdc |
Function |
Rectifier,charge, control |
||
Display mode |
LCD |
||
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
||
PWM constant pressure voltage |
>28Vdc |
>56Vdc |
>110Vdc |
3-phase load voltage of the wind turbine |
29±1Vdc |
58±1Vdc |
116±2Vdc |
Recovery charging voltage of the wind turbine |
27±1Vdc |
54±1Vdc |
108±2Vdc |
Solar stop charge voltage |
29±1Vdc |
58±1Vdc |
116±2Vdc |
Solar recovery charging voltage |
<28Vdc |
<56Vdc |
<110Vdc |
Low-voltage of the battery |
20±1Vdc |
40±1Vdc |
80±2Vdc |
Self-provided connecting wire of the battery |
>20mm² |
>10mm² |
>24mm² |
PWM fuse |
100A |
40A |
20A |
Solar fuse |
40A |
20A |
10A |
Charging fuse |
125A |
63A |
32A |
Work environment temperature |
-30-60°C |
||
Relative humidity |
<90% No condensation |
||
Noise (1m) |
<40dB |
||
Degree of protection |
IP20(Indoor) |
||
Cooling method |
Forced air cooling |
||
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
Size of the controller (mm) |
480*360*23 |
480*360*230 |
480*360*230 |
Weight of the controller |
23 Kg |
16 Kg |
16 Kg |
Size of the load (mm) |
490*460*310 |
490*460*310 |
490*460*310 |
Weight of the load |
15.5 Kg |
15.5 Kg |
15.5Kg |
3kw PWM charge controller normal spec:
Type |
3KW-24Vdc |
3KW-48Vdc |
3KW-96Vdc |
Wind turbine rated power |
3KW |
3KW |
3KW |
Wind turbine max. power |
6KW |
6KW |
6KW |
Solar panel |
900W |
900W |
900W |
Battery |
24Vdc |
48Vdc |
96Vdc |
Function |
Rectifier,charge, control |
||
Display mode |
LCD |
||
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
||
PWM constant pressure voltage |
>28Vdc |
>56Vdc |
>110Vdc |
3-phase load voltage of the wind turbine |
29±1Vdc |
58±1Vdc |
116±2Vdc |
Recovery charging voltage of the wind turbine |
27±1Vdc |
54±1Vdc |
108±2Vdc |
Stop charge voltage of solar panel |
29±1Vdc |
58±1Vdc |
116±2Vdc |
Recovery charging voltage of solar panel |
<28Vdc |
<56Vdc |
<110Vdc |
Low-voltage of the battery |
20±1Vdc |
40±1Vdc |
80±2Vdc |
Self-provided connecting wire of the battery |
>30mm² |
>12mm² |
>6mm² |
PWM fuse |
125A |
80A |
32A |
Charging fuse |
160A |
100A |
50A |
Work environment temperature |
-30-60°C |
||
Relative humidity |
<90% No condensation |
||
Noise (1m) |
<40dB |
||
Degree of protection |
IP20(Indoor) |
||
Cooling method |
Forced air cooling |
||
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
Size of the controller (mm) |
655*480*320 |
575*430*320 |
575*430*320 |
Weight of the controller |
27 Kg |
21Kg |
21Kg |
Size of the load (mm) |
495*460*320 |
495*460*320 |
495*460*320 |
Weight of the load |
16Kg |
16 Kg |
16 Kg |
5kw PWM controller normal spec:
Type |
5KW-48Vdc |
5KW-120Vdc |
5KW-240Vdc |
Wind turbine rated power |
5KW |
5KW |
5KW |
Wind turbine max. power |
10KW |
10KW |
10KW |
Solar panel power |
1.5KW |
1.5KW |
1.5KW |
Battery |
48Vdc |
120Vdc |
240Vdc |
Function |
Rectifier,charge, control |
||
Display mode |
LCD |
||
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
||
PWM constant pressure voltage |
>56Vdc |
>135Vdc |
>280 Vdc |
3-phase load voltage of the wind turbine |
58±1Vdc |
145±2Vdc |
290±5Vdc |
Wind turbine recovery charging voltage |
54±1Vdc |
135±2Vdc |
280±5Vdc |
Solar controller stop charging voltage |
58±1Vdc |
145±2Vdc |
290±5Vdc |
Solar restore charge voltage |
54±1Vdc |
135±2Vdc |
280±5Vdc |
Low-voltage of the battery |
40±1Vdc |
100±2Vdc |
200±5Vdc |
Self-provided connecting wire of the battery |
>20mm² |
>10mm² |
>6mm² |
PWM fuse |
125A |
63A |
40A |
Solar fuse |
32A |
16A |
10A |
Charging fuse |
160A |
63A |
50A |
Work environment temperature |
-30-60°C |
||
Relative humidity |
<90% No condensation |
||
Noise (1m) |
<40dB |
||
Degree of protection |
IP20(Indoor) |
||
Cooling method |
Forced air cooling |
||
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
||
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
||
Size of the controller |
500*440*290 mm |
||
Weight of the controller |
21 Kg |
||
Size of the load |
660*510*450 mm |
||
Weight of the load |
31 Kg |
10kw PWM Controller normal spec:
Type |
13KW-120Vdc |
Wind turbine rated power |
10KW |
Wind turbine max. power |
20KW |
Solar panel power |
3KW |
Battery |
120Vdc |
Function |
Rectifier,charge, control |
Display mode |
LCD |
Display content |
Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current |
PWM constant pressure voltage |
>138Vdc |
3-phase load voltage of the wind turbine |
145±2Vdc |
Recovery charging voltage of the wind turbine |
135±2Vdc |
Solar controller stop charging voltage |
145±2Vdc |
Solar restore charge voltage |
135±2Vdc |
Low-voltage of the battery |
100±2Vdc |
Self-provided connecting wire of the battery |
>12mm² |
PWM fuse |
80A |
Solar fuse |
25A |
Charging fuse |
125A |
Work environment temperature |
-30-60°C |
Relative humidity |
<90% No condensation |
Noise (1m) |
<40dB |
Degree of protection |
IP20(Indoor) |
Cooling method |
Forced air cooling |
*Communication interface (optional) |
RS485/USB/GPRS/Ethernet |
*Temperature compensation (optional) |
-4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C |
Size of the controller |
550*400*230 mm |
Weight of the controller |
21Kg |
Size of the load |
760*510*430 mm |
Weight of the load |
34 Kg |
3. 20kw 30kw PWM controller normal spec, pls contact with us.
We provide customized service. We need wind turbine normal data: rated power/max power/rated working voltage/battery stop charging voltage/battery restart voltage...
300w-10kw controller with dump is packed with carton. Normally delivery by express/by sea or by air.
PLC controller
Contact Us
- Qingdao HenryD Wind Power Equipment Co., Ltd.
Battery, inverter, controller,tower | Blades, pma | Fixed pitch wind turbine | Roller |
Tail control wind turbine | Ungrouped | Variable pitch wind turbine | Vertical axis wind turbine |
- 240v 380v 415v 20kw Inversor de red
- HENRYD!S type vertical axis wind turbine generator blades 1.3m 1.5m
- HLD wind turbine blades
- High efficiency low noise FRP Wind generator blades for 300w 500w 1kw 2kw 3kw 5kw 10kw 20kw 30kw wind turbine
- Henryd Wind turbine blades 2.5m for 5kw 6kw wind generator
- FRB Twist Vertical axis wind turbine generator blades 300w 500w 1kw 2kw 3kw 5kw
- 3kw Wind turbine blades 1.96m 2m
- FRB or Carbon fiber Horizontal axis Wind Turbine Blades 0.85m - 7.5m
- HENRYD! 2kw 3KW permanent magnet generator for wind generator
- Low rpm 300w-30kw permanent magnet generator alternator for wind turbine
- 5kw 10kw 20kw 30kw 50kw permanent magnet generator
- SALES! 1kw 2kw 3kw 5kw 10kw 20kw Permanent magnet Generators for wind turbine or hydro turbine
- Disc type Vertical permanent magnet generator 10w 20w 30w 50w 100w
- 3kw permanent magnet generator with 24v 48v 56v 60v 72v 96v 120v 220v 240v 380v
- HLD! Low rpm 500w permanent magnet generator for wind turbines
- HLD Horizontal axis Permanent Magnet Alternator
- Brushless Alternators 2000W wind turbine Permanent Magnet Generator
- High efficiency low rpm 3 phase permanent magnet generator for wind turbine
Popular Searches
- lightning conductor
- Copper Lightning Rod
- earthing system
- transmission rod
- 11 kv lightning arrester
- Copper Clad Steel Ground Rod
- static eliminator
- anti static device
- lightning connector
- plasma tv lift
- mtl safety barrier
- copper earthing bar
- copper earthing rods
- electrical earth rod
- earthing material
- Clad Steel Ground Rod
Find Similar Products By Category
- Electrical Equipment & Supplies > Other Electrical Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-