VAWT 500w vertical axis wind generator with 12v 24v off grid system kit

1. Henryd vertical axis wind turbine 300w 500w 1kw features 

300W 500w 1kw Vertical axis wind turbines are a type of wind turbine where the main rotor shaft is set vertically and the main components are located at the base of the turbine. VAWTs offer a number of advantages over traditional horizontal-axis wind turbines (HAWTs). They can be packed closer together in wind farms, allowing more in a given space. they are smaller, but rather due to the slowing effect on the air that HAWTs have, forcing designers to separate them by ten times their width.

300W 500w 1kw vertical wind turbine are rugged, quiet, light, Omni-directional, and they do not create as much stress on the support structure. They do not require as much wind to generate power, thus allowing them to be closer to the ground. By being closer to the ground they are easily maintained and can be installed on rooftop and similar tall structures.

Application: 

• Household, Garden, farm

• Telecom sites.• Rural electrification programs. Island , sentry, island, sight lighting .

The off grid  300W 500w 1kw vertical axis  wind turbine is often used in conjunction with solar panels to provide more reliable year-round energy supply.

Blades:

3 pcs FRB

Low noise level, high efficiency, long work life  

Generator:  

Type: 3 phase AC permanent magnet generator

Generator:Permanent magnet (Nd-Fe-B) 

Maintenance free

 500w vertical axis wind turbine normal spec:

Assembly testing at factory

FRB blades

Wind solar system for street light application

On the rooftop 

2. 10w-50w mini wind turbine spec: 

3. Vertical axis wind turbine 1kw 2kw 3kw 5kw  

1. 300W small Vertical wind turbine use inner foam protection outer Plywooden case .

500W vertical wind generator use inner foam protection outer Plywooden case .

2. Tower with Foam package only .

3. Controller invertor  with inner carton box outer plywooden case.

4. Pakage size and weight please refer to our sales.

5. Shipping  by sea with FCL LCL or by air .

If you have any request in package and shipping please tell our sales we will do according to your request.

 Provide professional wind turbine technical support;

Provide on/off grid system design, wind solar hybrid system design service. 

 Completely system provider and designer; 

Wind turbine type, model, capacity selection professional support;

Tower design, foundation drawing support;

Provide Pma, hub, flange drawing;

Provide OEM service, customized service.  

 Support paypal /west union payment, TT payment; 

certification and relating test report: CE/IEC/ISO/CNACL

Office, workshop, stock...

  1. Wind turbine model selection 

It depends your local annual average wind speed, daily/monthly home power consumption.  

Low average wind speed place, select larger blades rotor, higher rated working voltage; 

Rich wind place select speed limited wind turbine: variable pitch wind turbine, stall out vertical axis wind turbine.

The safety and steady working system is the first choice. 

2. Wind turbine tower selection 

Now we have guy wire tower, stand alone tower, tilting up tower, hydraulic tower. 

Guy wire tower cost is lower, easy to delivery. But the installation area is larger; 

Tilting up tower is for 500w-5kw wind turbine.  Easy installation, small installation area. But the delivery cost is higher. 

Hydraulic tower: It is used for no crane place. Easy installation and put down. The cost is higher.  

Stand alone tower for the installation place with crane. 

The tower height:  Make sure blades rotor is higher than wind turbine surrounding barrier height.  

3. Working system selection 

On grid system: wind turbine with tower + PWM controller with dump load + grid tie inverter; 

Off grid system: wind turbine with tower + PWM charge controller with dump load + battery group + inverter; 

Wind solar hybrid on/off grid system: Safety and reliable than only wind or solar system. 

Wind turbine water heating system: work in rich wind place. Average wind speed higher than 8m/s. 

For more question, pls contact with us directly.  We will give you a professional response.  

Why select us: 

We are the wind turbine designer and manufacture. We know our wind turbine advantage and disadvantage in different wind condition. 

I have more than 10 years wind turbine sales experience. We provide the right wind turbine and working system to different user according to their different situation and request. 

In 2004, there are 4 small wind turbine manufacture. Now there are so much trading company and manufacture, we know Chinese small wind turbine market well and can provide user more useful advise.