ET-126 Car Accelerator Pedal for forklift

Specifications:

Input voltage (volt): 24-48V DC
Signal output: 0-5V
Maximum throttle output: 5.3V
Minimum throttle output: 0V
Maximum deadband at zero throttle: 10 degrees
Maximum deadband at full throttle: 10 degrees
Forward/Reverse current: 1.5A max
Symmetrical throttle response in both directions
CURTIS ET-126 MCU throttle assemblies provide an analog 0-5V output proportional to throttle position for interfacing with CURTIS PMC motor speed controllers.

This new MCU version replaces the old ET-126 throttle. They are functionally identical, but the MCU version has a microprocessor, providing more accurate speed signal output.

Key Feature
Model: ET-126 MCU
Hall effect sensors and solid state MOSFET contactor drivers minimize moving parts, thereby increasing reliability and Mean Time Between Failure.
Symmetrical throttle response in both forward and reverse directions ensures smooth, concise acceleration and deceleration in both directions.
Minimal deadband areas at both zero and full throttle positions eliminates hesitation when beginning to accelerate or decelerate.
Environmental protection of major components through an epoxy layer over the circuit board assures operation in harsh environmental conditions.
Wig-wag type throttle returns the throttle to neutral for convenience and safety.
Input polarity protection to ensure no damage occurs to the throttle if it is incorrectly wired.
Easy to install.

Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.

Package:Normally we use the standard exporting packaging. We also can according to clients' request .

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%