Home > Products > Curtis Controller > 1266R-5351 Curtis Controller 350A 36V-48V for electric golf cart club car
1266R-5351 Curtis Controller 350A 36V-48V for electric golf cart club car
Negotiable
1 (Min.Order)
- 1000 per Month
- T/T Credit Card
You May Like
Product Description
Product Description
Specifications:
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input voltage (minimum): 16.8 V
Not like the CURTIS 1266A controllers (for example 1266A-5201), 1266R-5351 does not offer the "walkaway" feature.
* PWM operating frequency: 16 kHz
* Electrical isolation to heatsink (min.): 500 VAC
* KSI input voltage (minimum): 16.8 V
Not like the CURTIS 1266A controllers (for example 1266A-5201), 1266R-5351 does not offer the "walkaway" feature.
Product Paramenters
For the buyer without CONTROLLER APPLYING EXPERIENCE, please consult your cart/motor dealer and read carefully the 1266 Controller
Manual (PDF format) and 1266 Controller Datasheet (PDF format) before making the purchase.
When use CURTIS programming devices 1313-4331 Handheld Programmer or 1314 PC Programming Station, for activating the controller
1266R-5351, the J1-8 and J1-16 terminals of controller 16-Pin Molex connector should be connected to "B+" of DC power source
(minimum 16.8V, maximum vehicle system voltage); "B-" busbar should be connected to "B-" of DC power source (minimum 16.8V,
maximum vehicle system voltage).
We may supply also the full set of controller assemblage with throttle (foot pedal) of 1266R-5351.Overview:
CURTIS 1266 controllers are separately excited motor speed controllers designed for use in a variety of transport vehicles. These
programmable controllers are simple to install, efficient, and cost effective. Typical applications include golf carts and small
utility vehicles.
The 1266 controller offers smooth, silent, cost effective control of motor speed and torque. The speed sensor input allows
superior closed-loop control for regulating vehicle speed. Unique braking parameters allow simple, intuitive deceleration tuning.
A full-bridge field winding control stage is combined with a half-bridge armature power stage to provide solid state motor
reversing and regenerative braking power without additional relays or contactors.
Key Features:
* CURTIS Model: 1266R-5351
* Norminal Battery Voltage (Volts): 36V / 48V
* Amature 2 minute current rating (amps): 350A
* Field 2 minute current rating (amps): 30A
* KSI input current (typical): * 160 mA without programmer
* 200 mA with programmer
* Logic enable and logic power input voltage (minimum): 16.8 V
* Logic enable and logic power input current (no contactors engaged): 160 mA without programmer; 200 mA with programmer
* Logic input voltage: 20.0 V High; 7.5 V Low
* Logic input current 10 mA
* Throttle Type: various throttles can be used with the 1266 controller, including 5kΩ 3-wire potentiometers and 0–5V throttles
* Ambient operating temperature range: -40°C to 50°C
* Heatsink overtemperature cutback: starts at 85°C; cutoff at 95°C
* Heatsink undertemperature cutback: 50% armature current at -25°C
* Package environmental rating: IP5X
* Dimensions: L198 × W114 × H70 mm
* Net Weight: 1.9 kg
Features Include:
* Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
* Adjustable brake rates, for smooth pedal-release braking
* Two user-selectable vehicle operating personalities, with vehicle top speed controlled and limited in each mode
* Motor parameters are programmable to match the characteristics of the specific motor being used
* Vehicle speed control is enhanced through feedback from a Hall effect speed sensor
* Anti-rollback function, providing improved control when throttle is released on hills
* Anti-stall function helps prevent motor commutator damage
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Complete diagnostics through CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station and through the built-in
Status LED, for quick and easy testing, diagnostics, and parameter adjustment
* Two fault outputs provide diagnostics to remotely mounted displays
* Reverse signal driver provides a low signal any time the vehicle is traveling in reverse
* Driver outputs are short circuit protected and provide built-in coil spike protection
* Brake/Drive Interlock meets ISO stopping distance requirements
* Warning buzzer sounds steady in reverse, intermittent during WalkAway™ braking
* Splash resistant plastic cover
* Meets or exceeds EEC fault detect requirements
Manual (PDF format) and 1266 Controller Datasheet (PDF format) before making the purchase.
When use CURTIS programming devices 1313-4331 Handheld Programmer or 1314 PC Programming Station, for activating the controller
1266R-5351, the J1-8 and J1-16 terminals of controller 16-Pin Molex connector should be connected to "B+" of DC power source
(minimum 16.8V, maximum vehicle system voltage); "B-" busbar should be connected to "B-" of DC power source (minimum 16.8V,
maximum vehicle system voltage).
We may supply also the full set of controller assemblage with throttle (foot pedal) of 1266R-5351.Overview:
CURTIS 1266 controllers are separately excited motor speed controllers designed for use in a variety of transport vehicles. These
programmable controllers are simple to install, efficient, and cost effective. Typical applications include golf carts and small
utility vehicles.
The 1266 controller offers smooth, silent, cost effective control of motor speed and torque. The speed sensor input allows
superior closed-loop control for regulating vehicle speed. Unique braking parameters allow simple, intuitive deceleration tuning.
A full-bridge field winding control stage is combined with a half-bridge armature power stage to provide solid state motor
reversing and regenerative braking power without additional relays or contactors.
Key Features:
* CURTIS Model: 1266R-5351
* Norminal Battery Voltage (Volts): 36V / 48V
* Amature 2 minute current rating (amps): 350A
* Field 2 minute current rating (amps): 30A
* KSI input current (typical): * 160 mA without programmer
* 200 mA with programmer
* Logic enable and logic power input voltage (minimum): 16.8 V
* Logic enable and logic power input current (no contactors engaged): 160 mA without programmer; 200 mA with programmer
* Logic input voltage: 20.0 V High; 7.5 V Low
* Logic input current 10 mA
* Throttle Type: various throttles can be used with the 1266 controller, including 5kΩ 3-wire potentiometers and 0–5V throttles
* Ambient operating temperature range: -40°C to 50°C
* Heatsink overtemperature cutback: starts at 85°C; cutoff at 95°C
* Heatsink undertemperature cutback: 50% armature current at -25°C
* Package environmental rating: IP5X
* Dimensions: L198 × W114 × H70 mm
* Net Weight: 1.9 kg
Features Include:
* Regenerative braking, providing longer operation on a single battery charge and reducing motor brush wear and motor heating
* Adjustable brake rates, for smooth pedal-release braking
* Two user-selectable vehicle operating personalities, with vehicle top speed controlled and limited in each mode
* Motor parameters are programmable to match the characteristics of the specific motor being used
* Vehicle speed control is enhanced through feedback from a Hall effect speed sensor
* Anti-rollback function, providing improved control when throttle is released on hills
* Anti-stall function helps prevent motor commutator damage
* High pedal disable (HPD) and static return to off (SRO) interlocks prevent vehicle runaway at startup
* Complete diagnostics through CURTIS 1313-4331 Handheld Programmer or 1314 PC Programming Station and through the built-in
Status LED, for quick and easy testing, diagnostics, and parameter adjustment
* Two fault outputs provide diagnostics to remotely mounted displays
* Reverse signal driver provides a low signal any time the vehicle is traveling in reverse
* Driver outputs are short circuit protected and provide built-in coil spike protection
* Brake/Drive Interlock meets ISO stopping distance requirements
* Warning buzzer sounds steady in reverse, intermittent during WalkAway™ braking
* Splash resistant plastic cover
* Meets or exceeds EEC fault detect requirements
related products
our factory
Our Company
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We
have achieved great improvement since our company was founded in 2004.
We abide by the motto of Firstclass quality, Reasonable price, Best service and Professional product support.
Packing & Delivery
Exhibition
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our
sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less
than 0.2%
Please feel free to contact us if you have any problem!
Contact Us
- Hefei Huanxin Technology Development Co., Ltd.
Product Categories
New Products
- golf cart parts Curtis 1204M-4201 Controller 275a
- dc curtis controller 36v 24v for electric pallet truck 1204M-4201
- original curtis controller ready to ship 36v 48v 275A Series Motor Controller for golf cart
- Curtis 275A 36V 48V Controller for Electric Train
- 24v 36v 48v dc controller Curtis Motor Controller 325A for Electric cart
- Curtis DC Motor Controller 60V 400A from China
- New Version Curtis Motor Controller 400A
- Curtis 1207B-4102 Controller for Forklift Use
- Curtis DC Series Motor Controller 550A 1221-6701 for golf cart
- Curtis 1244 SepEx Controller 500A for Golf Cart
- 600A 48V Curtis Speed Motor Controller
- Curtis 38v 48v 275a Controller for Electric Mini Golf Cart
- Curtis SepEx Motor Controller 1266A-5201 DC Controller
- Electric Vehicle Curtis Controller 1266R Brush Motor Controller
- 36V 200A Curtis Speed Controller with Amazing Quality
- High cost-effective CURTIS 1244-6661 Programmable DC SepEx Controller
- 36V 48V 275A Curtis Motor Controller with work for XQ-3.4t Motor
- Curtis Controller 1204M-4201 DC Controller Made in Bulgaria
- Golf Cart DC Motor Speed Controller 36V 48V 275A
- Curtis Series Motor Controller 1204M-5305 325A
- Electric Pallet Truck Parts Curtis 1243-4220 SpeEx Controller
- Curtis 1266R-5351 Motor Controller 350A
- Curtis 600A Controller 1253-4804 dc Motor Controller
- Forklift Motor Controller 1212P-2501 Curtis DC Controller
Popular Searches
- 1238-6501 curtis controller
- curtis controller 1268-5403
- ac motor control
- controler ebikes
- cart control
- dc controls
- dc dc controller 2012
- dc lift motor controler
- lathe speed controler
- pwm for hho
- 1268-5403 curtis controller
- 1266-5201 curtis controller
- agv controller
- separately excited
- animation motor controller
- at motor controller
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Motor Accessories > Motor Controller
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-