Home > Products > UV Varnish > UV Primer Free Varnish MQ518A
UV Primer Free Varnish MQ518A
- T/T
You May Like
Product Details
Brand Name | Mejoel | Place of Origin | China | |
Model Number | MQ518A |
Product Description
We are looking for foreign distributors to establish cooperative relationship. Welcome to contact us.
Product description
MQ518A high gloss UV primer free varnish has good adaptability to printing. High gloss, good leveling, smooth surface feel and very low odor. You can directly on the printing paper surface without primer, with good 3M tape pulling ability, good resistance to oil explosion and scratching phenomenon.
Product characteristics
Appearance light yellow transparent liquid
Solid content 98%
Viscosity 40-50sec
Brightness ≥75
Abrasion resistance ≥500
Curing condition: varnishing speed above 2m/s, UV light intensity 80w/cm
Diluent Toluene or ethyl ester
Performance characteristics
High gloss, high adhesion, smooth, good flexibility
Scope of application
Food, medicine, cosmetics, electronics and other printed packaging products with high adhesion requirements
Use method
1. Mix thoroughly before use, park for 3-5 minutes for printing, and seal and save after use;
2. UV curing immediately after glazing;
3, when sealing the screen, use screen cleaning agent to clean, until the solvent is completely volatile before printing;
4, when printing especially thick ink layer, considering that after printing after UV light solidifying machine after the heat is too high to cause anti-stick phenomenon, with a thousand layer frame (dry frame) or erected to volatilize part of the heat after stacking;
5, printing scraper tilt, printing machine function to "stop or screen", mesh thinning, printing scraper pressure adjustment can increase the thickness of UV varnish. The speed of UV light fixing machine and the ambient temperature can affect the surface leveling.
Matters needing attention
1, it is recommended to use solvent resistant, alkali resistant and alcohol resistant ink printing;
2. Add 5%-10% thinner to dilute;
3. If drying is too slow, the paper walking speed can be appropriately reduced. If the drying is still not complete, it may be that the power of the UV lamp is too low, and it is recommended to use the radiation instrument for testing, and the lamp is recommended to be replaced after 800 hours;
4, this product has a certain irritation, avoid direct skin contact, if contact with detergent to clean;
5, the product should be placed in cool, dry and ventilated conditions, away from heat.
Contact Us
- Mejoel Technology Co.,Ltd.
- Contact nameFan Chat Now
- Phone86-0510-88259356
Product Categories
Water-based varnish | Blister Varnish | UV Varnish | Sealing Adhesive |
New Products
-
Polishing Adhesive by Hand MQ6202
-
Anti-slip Water-based Varnish MQ2052
-
High Gloss, High Abrasion Resistance Water-based Varnish MQ2051B
-
High Gloss Water-based Varnish MQ2051
-
Ultrasonic Water-Based Varnish MQ2054
-
Anti-slip Water-based Varnish MQ2052
-
Full-Matte Water-based Varnish MQ204B
-
Inline Wear-resistant Water-based Varnish MQ2102
-
Slip Water-based Varnish MQ2108
-
Press-polisher Varnish MQ2033
-
Semi-Matte Water-Based Varnish MQ204
-
Moisture-proof And Waterproof Varnish MQ2057
Popular Searches
- powder coating
- cosmetic bottle
- glass bottle
- glass vase
- laminating machine
- plastic cap
- wood coating
- coating machine
- uv dryer
- paint powder coating
- waterproof coating
- floor coating
- coating line
- pure polyester powder coating
- uv printing
- glass coating
- resin coating
- uv machine
- polyurethane waterproof coating
- acrylic waterproof coating
- uv coater
- silver cap
- screw neck
- lacquer coating
- primer
- printing ink
- curing agent
- wood varnish
- lacquer
- uv coating
Recommended Products
- Hot Stamping Foil
- Staples
- PS Plate Cleaner
- Fountain Solution
- Offset Printing Drying Spray Powder
- CTP Plate Cleaner
- MV.050.224 Switch Plate 00.500.0819 Straight Pin 00.540.0749 Countersunk Screw For Heidelberg Printing System Spare Parts
- Original BUM617-12/18-31-R-0001-0303-01 Ink Wheel Drive For Man Roland Offset Spare Parts
- 8C.37M51-A141 Servo Motor For Man Roland 300 500 700 900 Machine 00.4200.0005-43.041.544-038/21 8C37M51A141 Gear Motor Engine
- BUM619-12/18-31-R-0001-0303-01 For Man Roland 700 Drive Printing Parts 0 37U 3924 44 Circuit Board 037U392444
- Motor Drive Board NCR-DBA1A2B-401 5GH-2801-580 LS40 Servo Drive For Komori Offset Parts
- NI20-200FG-X4KT E NI20-200FG-X4KT AC Servo Motor For Komori L540C Water Fountain Roller Power Motor NI20200FGX4KTE Offset Press Parts
Find Similar Products By Category
- Packaging & Printing > Printing Materials > Other Printing Materials
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Fan
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile