Home > Products > Comsumer&Electronics > Unassembled VU9 Mini IN9 Nixie Tube Sound Level Meter Music Spectrum Display Analyzer Level Meter
Unassembled VU9 Mini IN9 Nixie Tube Sound Level Meter Music Spectrum Display Analyzer Level Meter
- 1000 per Month
- T/T Credit Card
- 2-Way Sine Wave 1-Way Square Wave Output 10MHz Reference OCXO Frequency Standard For EtherREGEN
- RC-1 Quick Release Antenna Bracket Kit For IC-705 Portable Shortwave Radio Communications
- RAT2 9K-6G 0-63.5dB Two-Channel Digital RF Attenuator
- RX-666 ADC Radio 1KHz-1800MHz 16Bit Sampling 32MHz Real Time Bandwidth TCXO 0.1PPM SDR Receiver
- High Resolution Digital Converter 14MP 2.4\"TFT Photo Scan Film EC018 Digital Film Scanner
- Premium Quality IEEE 488.2 778927-01 GPIB-USB-HS Interface Adapter GPIB Card Data Acquisition Card
Product Description
Unassembled VU9 Mini IN9 Nixie Tube Sound Level Meter Music Spectrum Display Analyzer Level Meter
Click to watch testing video:
/v_show/id_XNDcxNzY0MjA4MA==.html
Features:
- Original IN9 tube music level meter, with 3.5mm AUX input and microphone to achieve wireless pickup, can be matched very well with most common audio device such as mobile phone, computer, CD players, or speakers and so on, very suitable for home/office/studio audio system to dynamically decorate your auditory feast.
- Adopting 2PCS IN9 Nixie tubes, the orange light feels soft and warm, with strong vintage feelings and can be replaced by IN13 tubes. Specially design bias adjustment, easy to adjust the display height of tube light beam separately.
- Support Gain adjustment, the height of spectrum display height can be set at will, 0dB position can be set at random when recording is needed. GAIN setting is controlled by the microcontroller internal digital adjustment, has no physical contact with the input audio signal then has no impact on sound quality.
- Support sensitivity adjustment, the spectrum beat rhythm can be quickly set to adapt to different music styles. Generally, slow rhythm corresponds to slower beat, rock, punk and other fast-paced music is more suitable for faster beat.
- Support ACG and DB two display modes:
* In ACG mode, the input volume and the swing of light beam is not proportional. When the input volume is low, the swing amplitude of the light beam is large, and when the volume is gradually increased, the swing amplitude gradually becomes small. This mode cannot truly show the input level, not suits professional recording occasions but suits people's regular hearing habits.
* In DB mode, the swing of the light beam is proportional to the input signal. This display mode is suitable for some occasions that need to know the real music level, such as a recording studio or when testing a certain sound level.
- Mini size with exquisite appearance, default cool black case and knob, and equipped with elegant clear acrylic case and knob for replacement, can perfectly match with audio device of different styles and suitable for a variety of scenarios.
Parameters:
- Audio input: Support stereo RCA or microphone pickup
- Working voltage: 12VDC, 1A
- Tube model: IN9*2
- Working voltage of IN9 tube: 120V
- Light column sensitivity & gain adjustment: manually
- Gain mode: DB or ACG (Attention: DB is generally used for recording occasions, ACG is used for most ordinary occasions)
- Power on/off function: support
- Dimensions (W*D*H): 85*85*145mm / 3.35*3.35*5.71"
Functions:
- Stepless sensitivity adjustment (DELAY), you can quickly set the rhythm of spectrum beating, adapt to different music styles, generally slow rhythm corresponds to slower beating, rock, punk and other fast-paced music is suitable for faster beating.
- Stepless gain adjustment (GAIN), you can set the display height of the spectrum at will, or set your own 0dB position when recording needs
- For input, it supports two working modes: microphone pickup and LINE IN
- Display aspect: support DB, and ACG two working modes
- Supports IN9 and IN13 tubes, with bias adjustment, can adjust the display height parameters of the left and right spectrum respectively.
- All settings can be saved after power-off.
- Comes with burn-in function mode, for new tubes. It is recommended to start the machine for 1-2 hours. Accumulated about 100 hours. The electron tube can reach the best working condition.
Package Included:
- 1 x Set of Music Level Meter
Note: Assembling is needed.
Instructions for Use:
After receiving the goods, first install tubes on the host and fix it with screws. When installing, the direction of the tubes should be consistent with the symbol on the motherboard.
MODE Function Keys:
- Single click: Select LINE or MIC input, it can be turned on under shutdown state, and tests can be exited under test mode.
- Press and hold for 2 seconds: Select ACG or DB mode. Know mores about these two modes:
*ACG: Automatic control gain mode. This is a display method that uses dynamic square root audio compression algorithms.
* DB: Standard DB mode. For recording occasions, input signal is proportional to display height.
- Press and hold for 4 seconds: Power off and all lights are off.
Knobs' Functions:
- DELAY: Used to set the beating speed of light beam, which can be adjusted to an appropriate speed according to the speed of your music. It will be better visually. Suggestion: With slow-paced music, adjust its speed slower, and for rhythmic music, adjust its speed faster. All settings are displayed in real time, and the reference signal is the input audio signal. Please be sure to input music when adjusting.
- GAIN: Used to set the gain of input signal. This GAIN setting is not adjusted by using a potentiometer to attenuate audio signal through a resistance. This method will have some impact on audio source. It is adjusted by the internal digital control of MCU. GAIN's potentiometer has no physical contact with input audio signal. Therefore, the impact on audio signal is 0, which is a digital gain. Through this GAIN knob, you can set the beating range of light beam. If input signal is too small, gain can be increased appropriately. If the signal is too large. You can also reduce the gain appropriately. In short, users can set tube light column in an optimal beating range. In addition, for needs to record, you can also set your own 0dB position. Conveniently monitor recording volume.
ACG & DB Mode Description:
1.In ACG mode, the VU meter is driven by a dynamic square root audio compression algorithm, which means that the relationship between input volume and light beam swing is not proportional. It can be seen from the relationship diagram that when the input volume is small, the swing amplitude of the light beam is larger, and when the volume gradually increases, the swing amplitude of the light beam gradually becomes smaller. In this mode, users can use the VU meter in a larger audio input range without adjusting gain, and can obtain a good display effect at the same time. When the light beam jumps with music, even if volume input is too small, light beam will jump. Even if volume input is large, the maximum swing will not be reached. It is recommended to adjust GAIN to make the beam of light swing as close as possible to 70% (0dB), the effect is better. Driven by the algorithm of dynamic square root audio compression, it cannot truly display the true level of the current input volume, so it is not suitable for professional recording occasions. But this mode is suitable for people's regular hearing habits. Because human ear hears sound and the loudness of the sound has a ratio, not 1:1. For example, a 20W speaker and a 100W speaker have a power ratio of 5 times. If tubes are lit according to the actual length, there should be 5 times the display length change. But human ear does not sound like this, and only feels that the sound is only about 2 times different in loudness. That is to say, the sound of 100W seems to be only twice as loud as the 20W (about 40W, which is not the case). This is the actual difference, so in this case, if the light beam is lit up to about twice the length of the human vision It can match with hearing. Feeling more comfortable. But if it jumps according to the real value. The beam of light was lit up 5 times the length, which caused the sensory mismatch. Relatively less comfortable. (Only for most people, not all situations.)
2.In DB mode, the VU meter pushes the beam of light to jump after standard AD conversion. The data has not undergone any compression changes and is the most original. Therefore, the swing of the beam is proportional to the input signal. For example (not the actual test data), the audio signal input 0.1V and the bar display length is 10mm, then input 0.7V. The bar will show a length of 70mm. In this mode. The display length of the signal and the light beam is 1:1 true. For some occasions where you need to know the real music level, such as a recording studio or testing a certain sound level, you can choose this mode.
Using Tips:
- When setting sensitivity, there must be music input. Otherwise, light beam will not jump, and you will not be able to see the actual effect of current setting. Double-click and single-click function key. Operate at the speed you normally use when operating a computer. When you click to select, there will be an appropriate delay, which is designed by the program. This is normal.
- When using the microphone to pick up sound, adjust the Gain knob appropriately according to speaker playing volume or the distance from the VU9 to the speaker to get a better display effect.
Precautions:
- All new tubes are used. They have been aged for 1-2 hours before leaving the factory. However, individual tubes may still show inaccuracy when received. Normally use for 1-2 days. Users can also set to enter burn-in mode by themselves. Use it for 3-5 hours.
- Tubes need to be preheated, and individual tubes have a long preheating time, and may not light up at the same time when they are turned on, but there is no need to worry. Generally in about 5-20 seconds, tubes will automatically light up. This is normal.
- There is a high voltage 120Vdc in the machine. For non-professionals, please not open the case when the machine is turned on.
Package: Normally we use the standard exporting packaging. We also can according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%
Please do not hesitate to contact me if you need any further information
Whatsapp/Tel/Wechat: 8619902906050
Web:
Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)
Contact Us
- Shenzhen Tianzhongtian Trading Co., Ltd.
Business&Industry | Comsumer&Electronics | Health&Care | Hobbies&Toys |
household products | Metal Detector | Tester Equipment | Ungrouped |
- MAT-705 1.8-54.0MHz Shortwave QRP Automatic Antenna Tuner For IC-705 Transceiver
- MAT-1500 3.5MHz-54MHz 1500W PEP HF-SSB Automatic Antenna Tuner For High-Power Transmitters Power Amp
- MC202 2 IN 2 OUT Network Amplifier Speaker Switcher Selector Audio Crossover
- VFD8 Wood Mini VFD Clock Vacuum Fluorescent Display Retro Tube Desk Shelf Clock
- Assembled ATU-100 PLUS Upgraded 100W Open-Source Shortwave Automatic Antenna Tuner w/ 12V 1A Charger
- SI4732 FM AM (MW And SW) SSB (LSB and USB) All Band Radio Receiver w/ Shell Antenna Built-in Battery
- RDS FM Radio EL-30H 15W 1-3KM Wireless FM Transmitter Radio Broadcast Transmitter
- EL-07 5W Stereo Wireless Radio Power Adjustable FM Transmitter w/ Outdoor Antenna Audio Cable
- SI4732 FM AM (MW And SW) SSB (LSB And USB) All Band Radio Receiver with Shell Antenna Built-in Battery
- Premium Quality 778927-01 IEEE 488.2 GPIB-USB-HS Interface Adapter GPIB Card Data Acquisition Card
- K4 Manual Telegraph Key CW Key Morse Key For Shortwave Radio Morse Code Practices CW Communications
- NF-1000 5M-1.5GHz RF Noise Source Generator Spectrum Analyzer for Tracking Source Adjustable Amplitude
- 10MHz 2.5M 1M 100K 10K 1K 10Hz 2Hz OCXO Frequency Standard Reference Module Board For Radios
- Black Metal Case Aluminum Case Shell For PortaPack H2 Case HackRF One SDR Radio DIY Uses
- Thicker 400MHz-2GHz DSP Malahit Malachite SDR Receiver With Registration Code + Mini-Whip Antenna
- Thicker 50KHz-200MHz DSP Malahit Malachite SDR Receiver Without Registration Code + Mini-Whip Antenna
- 87-108MHz 3dB Gain 100W CZE-GP2 1/4 Outdoor FM Transmitter Antenna Kit with 15M Feeder
- Radio Direction Finding Passive Radar Beamforming Original Version Assembled RTL-SDR Software Radio Receiver
- 1 MHz to 6 GHz HackRF One Starter HackRF One SDR Board with Shielding Cover
- 0.1-2000MHz Gain 30dB Low-noise LNA RF Wideband Amplifier
- Unassembled NanoVNA Testboard Kit Demo Board Vector Network Analyzer Testing Board
- ADS-B Antenna 1030MHz Active Receiving Antenna for Radio Frequency
- 60V 11000VA Pure Sine Wave Inverter Board Power Frequency Inverter Board
- Thicker 50KHz-2GHz Malachite SDR DSP Malahit SDR Receiver with Official Authorized Registration Code
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Level Measuring Instruments
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-