Description:
This electronic load uses IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can guarantee the stability for a long time use, power redundancy is no less than 50% (25℃).

Specifications:
Power supply voltage: DC 12V (±5%)
Maximum load voltage: 100V
Constant current discharge adjusting range: 0-20A
Work mode: single mode constant current mode (CC)
Maximum discharge current error: 0.7%-0.01A
Maximum discharge power: 250W

Features:
-Adopts IR power tube and double high-speed ball bearing fan, with big fin heat sink.
-Digital tube display, intuitive and long lasting, more resistant to high temperature.
-During discharging constant current, it can display voltage and current, visually reflecting the discharge conditions.
-Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.
-Suitable for assembly of power adapter fully-automatic burn-in cabinet.

Instructions:
1. Turn on the 12V working power supply and turn on the electronic load mode. Make sure that it is in the stopped state (the knob is the smallest counterclockwise) and connect the tested power supply to the test input power port. Be careful not to connect the wrong polarity.
2. Set the constant current through the knob.

Package list:
1 x Electronic Load Module

Note: Because it is open work, there is no internal voltage limit and power limit, but the normal work should be below 100V, and work below 250W.

Package: Normally we use the standard exporting packaging. We also can according to clients' request .

 Shipping : 

1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier  we are co-operating at present.

2. By Air: Delivery from the Shanghai airport to customers’ destination city air port.

3. By Sea: Delivery from the Shanghai sea port .

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

A: Samples arrived often need 3-5 days.

Q3. Do you have any MOQ (minimum order quality)limit?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.

Q5. How to proceed an order?

A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.

Q6. Is it acceptable to print my logo on the product?

A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer one-year warranty for our products.

Q8: How to deal with the flaw?

A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%

Please do not hesitate to contact me if you need any further information

Whatsapp/Tel/Wechat: 8619902906050

Web: 

Address: Room 303 Building 2,Youpin Cultural and Creative Park,Zhangkeng,Minzhi Street,Longhua District,518131,Shenzhen,China(Mainland)