Home > Products > Business&Industry > LF77-AKZ250-USB3-NPN 3 Axis Mach3 CNC Motion Controller Mach3 USB Controller For CNC Engraving Machines
LF77-AKZ250-USB3-NPN 3 Axis Mach3 CNC Motion Controller Mach3 USB Controller For CNC Engraving Machines
- 1000 per Month
- T/T Credit Card
- Quick TS1200A 120W Lead-Free SMD Soldering Rework Station with Soldering Iron Tip Touch Button
- Leadshine DMA860H 7.2A DC 24-80V Stepper Motor Driver for 86 110 2-Phase Stepping Motor CNC
- LEKN (C1) Laser Engraving Machine CNC Controller Board CNC Shield DIY GRBL Controller Board
- 12V 1500W Pure Sine Wave Inverter Board for 110V/ 220V To 6V-7V Power Frequency Transformer
- 36V 4000W Pure Sine Wave Inverter Board for 110V/220V To 18V-21V Power Frequency Transformer
- 72V 7500W Pure Sine Wave Inverter Board for 110V/220V To 36V-42V Power Frequency Transformer
Product Description
LF77-AKZ250-USB3-NPN 3 Axis Mach3 CNC Motion Controller Mach3 USB Controller For CNC Engraving Machines
Version Introduction:
THIS is a 3-axis Mach3 USB interface board (NPN) worked with Mach3.
Features:
- It has a USB interface and no driver is required.
- Support 3-axis linkage, 500KHz output at the same time, connected to servo/stepping. Any one axis can be configured as a pulse spindle.
- 2 real-time electronic handwheel (MPG) input ports, which can connect 2 electronic handwheels at the same time. When the MACH3 electronic handwheel is set in Multi-Step mode, it has the same real-time performance as the CNC machining center, and runs smoothly. There is no delay in the control board, and the performance of the mechanical system is fully utilized.
- With real-time jog, there is no delay in the control panel, the motor responds quickly and quickly, and the experience is zero delay.
- 16 general digital input points, corresponding to 16 LED indicators. Customize the configuration function in MACH3. Support Mach3 spindle speed measurement function.
- 8 general-purpose digital output points, configurable as: spindle start/stop/coolant/custom M code VBasic programming control
- 1 PWM output point for analog spindle speed control: pulse width speed control / 0-10V inverter speed control.
- 2 analog inputs, used to adjust the processing speed / jog speed / spindle speed.
- 1 status indicator, which can indicate the USB connection, and the status of the motor is clear at a glance.
- Using 3 dual-channel 10Mhz high-speed optocouplers, 26 general optocouplers, a total of 29 optocouplers, isolate all input/output. The high-cost design provides complete anti-interference performance and complete safety protection.
- Without PC intervention, the signal is processed independently by the motion control board to ensure that you have real real-time and reliability.
- Support all versions of Mach3. Supports all versions (32-bit/64-bit). For Windows XP to Windows 10, and all Windows versions are plug and play.
- The chip firmware supports upgrades, and users can continuously get the latest function support.
- Provide a complete installation manual with clear documentation, illustrations and detailed descriptions.
- 16 input/8 output/3 axis/spindle speed control signals are all optically coupled and electrically isolated. Highly safe and reliable design.
Environmentally-Friendly Copper Terminals:
Axis output x3 / general output x8 / PWM output x1 / general input x16 / power input
Copper USB Socket:
3-axis output signal (direction signal + pulse signal): 10MHz high-speed optocoupler isolation x6 channels
Optocoupler isolation PWM spindle speed control signal output x1 / Optocoupler isolation general output x8
8-channel output driver chip, using high-quality round pin sockets, convenient for users to replace the chip
Optocoupler isolated NPN input x16 / power input
2 groups of power supplies: BUCK switching power supply + LDO low dropout linear power supply
Tantalum capacitor + self-recovery fuse + anti-reverse diode + TVS anti-surge diode
USB cable (Accessory: USB cable *1.5M, 7mm magnetic ring *2)
External magnification knob
Wiring of Controller Board & Laptop:
Download:
- Installation manual (AKZ250V3) version 1.0.4 (ZIP/7M) /files/usb_eth_edg381/Mach3_USB_Motion_Board_NPN(AKZ250V3)Installation_Manual(english).zip
- Plugin V1.2.1.0 (eMotionMach3.ZIP/0.3M) /files/usb_eth_edg381/eMotionMach3.zip
- Download Latest Mach3: /software/mach3/
Schematic Diagram:
USB main control chip + external magnification knob x2
10MHz high-speed optocoupler isolation x6 channels + optocoupler isolation PWM spindle speed control signal output x1 Optocoupler isolation NPN input x16 + Optocoupler isolation general output x8
Power Supply:
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample ususally take within 3 working days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: For standard product, usually 1pcs/item. For the OEM order, MOQ at least 50pcs/item.
Q4. How to proceed an order?
A: After buyer confirm the product&price is ok and ready to buy, order will be please tell us your delivery address, phone number, sometimes need email. Then we can draft the order and it will have a alibaba paying link.
Q5. After paid, what info of the supplier provided?
A: Tracking number
Q6: Do you offer guarantee and after-service for the products?
A: Yes, 6- 12 months warranty for our products. Note: We will do not take the responsibility for Man-made damage or improper operation. Delivery demage will be negotiate.
Packing and Shipping
Package: Normally we use the standard paper package to export worldwide.
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier we are co-operating at present.
2. By chinese small parcel, usually for the customer to save the cost. But Chinese small parcel have the risk for lost parcel. Note: If we got the parcel back, we only can refund the item cost. If we didn't get the parcel,then sorry we can't refund any.
3. By Air: Delivery from the Shenzhen airport to customers’ destination city air port.
4. By Sea: Delivery from the Shenzhen sea port .
Company information
TZT has been speciliazing in Business & Industry,Hobbies & Toys,CNC Products and Health care supplies for over 5 years.We committed to enhance customer satisfaction by continually improving the process with a vision of expertise in the field.
Aiming to provide high quanlity products and great service for buyer,we are strict on product quanlity control and offer instant communication service.Welcome to contact us!
Our Advantages:
- Source only the best consumer goods and ensure the highest quality.
- Streamline the buying and payment process, and make it as easy as possible.
- Help the customers all over the world discover products and manufacturers in China.
- The Shortest order processed time and speed delivery
Contact Us
- Shenzhen Tianzhongtian Trading Co., Ltd.
Business&Industry | Comsumer&Electronics | Health&Care | Hobbies&Toys |
household products | Metal Detector | Tester Equipment | Ungrouped |
- 12V 1500W Pure Sine Wave Inverter Board for 220V To 6V-7V Power Frequency Transformer
- 36V 4000W Pure Sine Wave Inverter Board for 220V To 18V-21V Power Frequency Transformer
- WHB04B-6 6 Axis XHC Mach3 Remote MPG Pendent CNC pendant USB Wireless Handwheel
- 220V 200W 90mm Blade Electric Cloth Cutter Fabric Cutting Machine Leather Cut Device Round Scissors
- 3.5\" Fabric Leather Cutting Machine 90mm Electric Cloth Cutter with Round Scissors + Blade
- X-Phase 1-30MHz HF Bands QRM Eliminator With Aluminum Alloy Shell PLZ-QRM-Eliminator
- 4-Axis Industrial Robotic Arm 4-DOF Robot Arm + 3pcs 57 Gear Motors Max. Load 2.5kg
- SUNKKO 738AL 18650 Battery Spot Welder Pulse Spot Welder + 73LB Welding Arm Without Welding Pen
- SUNKKO 738AL 18650 Battery Spot Welder Pulse Spot Welder + 73LB Welding Arm + 70BN Welding Pen
- 737DH 220V Induction Delay Battery Welding Spot Welder Machine For 18650 Lithium Battery
- PB-6 Throttle 0-5K Ohms 2-Wire Golf Cart Potentiometer for Curits Style
- MA-905 Adjustable Rail Automatic Screw Feeder Machine for 1.0-5.0mm Screws
- FA-560 1.0-5.0mm Adjustable Rail Automatic Screw Feeder Machine for Screws
- MA-905 Adjustable Rail Automatic Screw Feeder Machine for 1.0 to 5.0mm Screws
- SUNKKO 738AL 18650 Battery Spot Welder Pulse Spot Welder + 73LB Welding Arm + 70BN Welding Pen
- SUNKKO 738AL 18650 Battery Spot Welder Pulse Spot Welder + 73LB Welding Arm Without Welding Pen
- High Precision LY60-L XY-Axis 60*60mm Manual Displacement Platform Manual Sliding Table Stage
- FX3U-48MR Full Function PLC Controller Board w/ RS485 Clock Shell PLC Controller 24 Input 24 Output High-Speed Counting
- 4000W ZVS Induction Heater Main Unit+Coil+Pump+Pump Power+70mL Crucible+2 Power Supply+Air Switch
- 60*60mm XYZ60-L High Precision XYZ Axis Trimming Platform Sliding Table Linear Stage Manual
- XYZR60-L 60*60mm XYZR High Precision 4Axis Linear Slide Stage Manual Trimming Platform
- 4Axis CNC Pendant Pulse Wave Output 25PPR MPG CNC Handwheel For Mitsubishi CNC System
- FA-580 Automatic Screw Feeder Machine with Counting Digital Display Buzzer for 1-5mm Screws
- 36V 7500VA Pure Sine Wave Inverter Board Inverter Driver Board Power Frequency Inverter Motherboard
Popular Searches
- Axis Breakout Board
- cnc milling controler
- cnc controlled
- capping machine controler
- mani controller
- mani control
- mach3 cnc control card
- mach3 breakout board
- 4 axis controler
- mach3 usb breakout boards
- acs motion control
- controll systems
- cnc controll turning
- cnc controller for machin center
- camcorder motion controllers
- ccs motion control
Find Similar Products By Category
- Machinery > Machine Tool Equipment > Machine Centre & Parts > CNC Controller
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-