Veterinary Infusion Warmer TF-III Model

Veterinary Infusion Warmer TF-III Model

TF-III Infusion Warmer is a ‘dry heater’, which does not directly contact the heated liquid in working process.

It transfers heat from heat exchanger through infusion tube to liquid in the pipe to achieve the purpose of continuous heating to flowing liquid. The operator can adjust the setting temperature in the range of 35°C - 42°C according to actual needs, and the heater can automatically work to the preset temperature with the built-in intelligent chip and maintain the constant temperature state after reaching the target temperature.

Device Dimension: 180mm x 70mm x35mm

Weight: ≈0.2KG (without knob); 0.4kg (with knob)

Display Type: Led

Applicable IV set: Exclusive IV Set or standard single PVC IV Set (20 and 60 d/mL, with outer diameter 3.4 ~ 4.5mm)

Temperature Range: 35°C~42°C (95~107.6F), 0.1 °C increment

Optional Unit: (°C) and (°F)

Temperature Accuracy: ±1°Cor±1.8°F

Warning up time: <2min

Overheat Protection: 48°C

Alarm: Overheat, low temperature, system error, door open, heating reminder

Input Voltage: 100-240V

Frequency: 50Hz/60Hz

Power: 85VA