Industrial waste gas scubber FRP tail gas absorption tower GRP acid mist gas absorption tower

Introduction of FRP absorption tower

The FRP Acid Mist Gas Absorption Scrubber Tower is mainly composed of Water tank, Circulating water, Packing layer, Spraying system, Demister etc.
The FRP Acid Mist Gas Absorption Scrubber Tower is designed to capture dust particles, VOCs, chemical fumes, and other water / chemically soluble fumes and Vapors generated in industrial process.

Desulphurization spray layer is based on the upper part of the tower, the absorption tower slurry circulating pump corresponding to each spray layer. The nozzle configuration of spray layer is simulated designed by professional software in order to ensure good contact with alkali and acid reverse gasreaction; and finally reach purification effects.
Demister installs in the upper of desulphurization tower, a total of two levels.The net is used to separate the entrainment of flue gas cloud droplets, and droplet concentration in flue gas export from mist eliminator is less than 75 mg/Nm3 (dry basis).
At the same time, the equipment also has spray washing device to the tiny dust particles adhesion and desulphurization of flue gas crystallization on the demister system resistance increases.

Product Structure of FRP Absorption Tower

1. The body of the tower is made of FRP (fiber reinforced plastics), and its surface is bonded by gel coat resin, it has aging-resistant, corrosion resistant and beautiful & smooth surface etc characteristics.
2. The fan can be made of aluminum alloy or FRP, it has large wind volume, low noise, high efficiency, stable running, long service life etc characteristics.
3. The motor is the special motor which can be used outdoor, it has energy saving, high efficiency etc properties, the speed reducer is the special used for the cooling tower.
4. The filler is new type and high efficiency, it has water distribution is uniform, small wind resistance and high temperature resistant etc characteristics.
5. The steel support adopts advanced galvanization process, it has excellent corrosion resistant property.
6. Because the cooling tower can be installed by assembly, the volume of water treatment can be increased manyfold, but the land which be used for the cooling tower is small.
The water treatment volume of single cell is 50m3/h-7000m3/h, except help customers to buld new cooling towers, we also provide maintenance service, include replace old PVC fill, ABS spraying head, FRP panels etc. 

CHINA AOLIANDE TRADING COMPANY

Aoliande was founded in 1992.one of the biggest FRP production bases in China with annual capacity of 60000 tons.The products have been exported to all over the world.Meantime we have made good cooperation with many firms of top 500 of the world,such as BAYER,BASF,Rohm and Haas,DOW Chemical,Fluor.
After 20 years' development,we have created 7 First in FRP industry;
First China Well-Known Trademark-"ALD Brand"
First China Top Brand
First enterprise which passed the assurance of ISO9001,ISO14001,OHSA18001 and GJB9001
First enterprise that got two certificates on National Key&New Products
First enterprise that have developed FRP joined middle &small scaled clarification tanks successfully adopting the international advanced technology
First enterprise that make comprehensive cooperation with one of top 500 firms-Sekisui Chemical Co.,Ltd.