Desktop 25-999g Bean Seed Granule Bag Weighing and Filling Machine

1.Before use this machine, please disassemble screws under the base, please check the photo below, for some models, you should open the under door, then check inside, there are also some screws need to be removed.

2. Connect the electricity, open the power button on the side of the machine, the lamp on the control panel will light up, then it will have a voice like "bi--", then press the discharge button, the machine will reset all the data and wait for using.

3. Pull your material which need fill into the hopper, then set the volume/weight by pressing the buttons on the control panel, "plus" or "minus" the number until the weight you need.

4. Set the speed, there are two different speed you can choose, on the control panel, they are "fast", "middle", "slow". It depend on the material diameter, you can test it then choose the speed which is suitable for you.

5. If you test it, please choose the "slow",then press the start button, then the machine will work.

6. When the machine is working, if you want to stop it or you have finished, you can press the "stop" button to stop the machine, and let the machine wait for next time work.

7. The packing times will show on the "Number" which is showing on the control panel, you can restart the machine to reset this packing times number into 0.

8. If you want to exhaust all the material out, please press the "drop" button as long as 5secs, then the machine will drop all the material until empty.

9. After work, if you don't need to use this machine for a long time, please switch off the machine.