Home > Products > Custom Battery Packs > Customized Rechargeable lithium ion lifepo4 12v 200ah 12v deep cycle battery for RV
Customized Rechargeable lithium ion lifepo4 12v 200ah 12v deep cycle battery for RV
Negotiable
1 (Min.Order)
- T/T Credit Card
You May Like
-
Wholesale Ni-MH 2.4V 600mAh rechargeable nimh battery pack with wire connector
-
Customized logo NiMH 600mah 5/4AAA 2.4v Rechargeable Battery Pack for Beauty electronic products
-
Wholesale price Rechargeable nimh 3.6v 600mah battery pack for scanner
-
DIY 5/4AAA 850mAh 3.6V Ni-MH Replacement Rechargeable Battery for Cordless Phone
-
Customized 3.6V 700mAh NiMH AA rechargeable battery pack with connector
-
Customized NIMH AA 3.6V 700mah Rechargeable Battery Pack For Cordless Phone
Product Description
Product Description
Customized Rechargeable lithium ion lifepo4 12v 200ah 12v deep cycle battery for RV
Material: Lithium Battery
Model: li ion battery pack
Type: Lifepo4 Lithium ion battery
Warranty: 1 year
Material: Lithium Cobalt Oxide
Warranty: 1 year
Material: Lithium Cobalt Oxide
Voltage:12v or Custom
Nominal Capacity: 200Ah or Custom
Housing:Metal,Plastic, Shrink Film Usage: Energy Storage,Power tools, electric bike,electric car vehicle,water pump etc.
Li ion batteries packs are assembled with 18650 cylindrical cells to meet many special large-scale electric modules, like telecom basic station, solar energy savings, etc. Doublepow battery has more than 10 professional R& D engineers who are devoted themselves to working out the best kind battery packs for your electric modules.…
Battery Series | Battery Type | Battery Size | ||
1.2V NiMH / NiCD Battery | Rechargeable | AA/AAA/C/D | ||
1.5V Li-ion Battery | Rechargeable | AA/AAA/C/D | ||
3V Lithium Battery | Rechargeable | CR2/CR123A | ||
3.2V LiFePo4 Battery | Rechargeable | 10440~18650~32700 | ||
3.7V Li ion Battery | Rechargeable | 10440~18650~26650 | ||
9V Battery | Rechargeable | Prismatic | ||
Button Cell Battery： Alkaline-Mn Li-Mn | Non-Rechargeable | 1.5v: AG1~AG13 3.0v: CR1220~CR2032~CR2450 | ||
1.5V Dry Battery | Non-Rechargeable | AA/AAA/C/D | ||
Custom Battery Pack | Rechargeable | Custom size | ||
Battery Accessories LED Bulb Lights Rechargeable Mini Fan Power station | Rechargeable | 80w/100w/150w Mini Fans | ||
Battery Charger for all of standard rechargeable batteries | ||||
More Series Battery Packs
If you need to customized other series battery packs, please Send Us An Inquiry or Email with your mailing address, we will reply you within half an hour, thank you very much !
If you need to customized other series battery packs, please Send Us An Inquiry or Email with your mailing address, we will reply you within half an hour, thank you very much !
Recommend Products
Customizable Logo & Wrapper
We can be customized Logo & Wrapper according to your demand^^including our battery chargers.
We can customize 3.7V, 7.4V, 12V 24v series battery pack
Please tell us the Battery Capacity, Type,Rate Capacity,Pack Configuration Battery Nominal Voltage,Pack Nominal Voltage,Pack Max Charge Voltage. Max Charging Current,Max Discharge Current,Normal Discharge Current,Discharge Working Temp,Charge working Temp,Battery Overcharge Protection Voltage, Pack Overcharge Protection Voltage,Wire and Connector,etc.
Our Company
Customer Reviews
Certifications
Packing & Delivery
Packing
We strictly obey battery transportation rules,which transportation departments of air,express or sea request. Normally,each battery will be packed by PE or other insulation bag,or tray,and ensure each one must be insulated from others,then put them in certain carton as our shipping carriers request.We also accept special inner packaging for each battery as you request.
FAQ
All About 18650 Li-ion Battery Pack
A battery pack is a set of any number of identical batteries or individual battery cells. They may be configured in a series,parallel or a mixture of both to deliver the desired voltage, capacity, or power density. 18650 Li-ion cells are a great way to power Projects. Which provides a nominal voltage of 3.7V which is not sufficient for most of the application for let's say you want to power a BLDC motor with an ESC which requires 9V to start. So we need more voltage which can be achieved by connecting them in series. We will show you how you can make a 18650 Li-ion Battery Pack with a BMS circuit and all the things you need to know before you built one!
1. Everything We Need for Building a 18650 Battery Pack
1)18650 Li-ion cells - 18650 batteries are used for powering everything from laptop batteries to electric vehicles. It is a standardized type of lithium-ion battery, cylindrical in shape and measuring 18mm in diameter by 65mm in length (give or take a few 1/10s of a millimeter).
2)BMS - A battery management system (BMS) is an electronic system that manages a rechargeable battery (cell or battery pack),such as by protecting the battery from operating outside its safe operating area, monitoring its state, calculating secondarydata,reporting that data, controlling its environment, authenticating it and / or balancing it.
3)Plastic Spacer- Replacing the traditional general adhesive with a professional battery holder, the combination is very convenient, the connection is more firm, and the battery maintenance is also convenient. It is the best choice for battery packs.It makes building battery pack much less painful.
4)Spot welder - One of the purposes of spot welding is to join 2 or more components together in a mainly permanent fashion. you can buy one or built one.
5)Nickel Ribbon - Nickel ribbon is commonly used in battery building due to its ease of use in spot welding and soldering as well,its high corrosion resistance over time.
2. Check the Battery and Charge Them Up!
First, we need to check the capacity of all the cells & make sure all the cells are at the same voltage. It is mandatory that all the cells are at the same voltage else cells will end up charing each other and it can lead to unexpected results.
3. Calculations for the battery pack voltage and capacity
18650 cell can provide a Nominal voltage of 3.7V, Minimum voltage of 3V and Maximum voltage of 4.2V. So if we consider nominal voltage, connecting 6 cells in series will give us 22.2V which is a 6S1P Configuration. Where 6S means 6 Cells in series and 1P means 1 cell in Parallel. By adding another 6 Cells in parallel we can not only double the capacity but also the amount of current
Pack can deliver.
4. Building the Pack and Spot Welding
For building the battery pack we need tiny black Plastic spacers which snap like Lego and can be very useful as we don't need to use adhesive instead. Now make 2 pairs of 6 plastic spacers, Insert the cells in alternation pattern. Now we measured the spacing between 2 cells and it was about 25mm. So I used Nickel Ribbon marked 25mm on it and used sharp scissors to snap it. Now Place the Nickel pieces on top of cells and make a series connection use a spot welder to fuse nickel ribbon and battery top.
5. Adding BMS
Now we can add and plug and call it for the day but we can also add a BMS which adds over charge, over discharge and some of the also add Balance charging to the battery pack. we just have to solder it to the battery pack as shown on the board. Also, some BMS like mine does not offer Balance charging so you need to add and Balance charging connector and You are done!
If you want to know more information about us, please Send Us An Inquiry or Email, welcome to visit our company and factory in Shenzhen, China.
1)18650 Li-ion cells - 18650 batteries are used for powering everything from laptop batteries to electric vehicles. It is a standardized type of lithium-ion battery, cylindrical in shape and measuring 18mm in diameter by 65mm in length (give or take a few 1/10s of a millimeter).
2)BMS - A battery management system (BMS) is an electronic system that manages a rechargeable battery (cell or battery pack),such as by protecting the battery from operating outside its safe operating area, monitoring its state, calculating secondarydata,reporting that data, controlling its environment, authenticating it and / or balancing it.
3)Plastic Spacer- Replacing the traditional general adhesive with a professional battery holder, the combination is very convenient, the connection is more firm, and the battery maintenance is also convenient. It is the best choice for battery packs.It makes building battery pack much less painful.
4)Spot welder - One of the purposes of spot welding is to join 2 or more components together in a mainly permanent fashion. you can buy one or built one.
5)Nickel Ribbon - Nickel ribbon is commonly used in battery building due to its ease of use in spot welding and soldering as well,its high corrosion resistance over time.
2. Check the Battery and Charge Them Up!
First, we need to check the capacity of all the cells & make sure all the cells are at the same voltage. It is mandatory that all the cells are at the same voltage else cells will end up charing each other and it can lead to unexpected results.
3. Calculations for the battery pack voltage and capacity
18650 cell can provide a Nominal voltage of 3.7V, Minimum voltage of 3V and Maximum voltage of 4.2V. So if we consider nominal voltage, connecting 6 cells in series will give us 22.2V which is a 6S1P Configuration. Where 6S means 6 Cells in series and 1P means 1 cell in Parallel. By adding another 6 Cells in parallel we can not only double the capacity but also the amount of current
Pack can deliver.
4. Building the Pack and Spot Welding
For building the battery pack we need tiny black Plastic spacers which snap like Lego and can be very useful as we don't need to use adhesive instead. Now make 2 pairs of 6 plastic spacers, Insert the cells in alternation pattern. Now we measured the spacing between 2 cells and it was about 25mm. So I used Nickel Ribbon marked 25mm on it and used sharp scissors to snap it. Now Place the Nickel pieces on top of cells and make a series connection use a spot welder to fuse nickel ribbon and battery top.
5. Adding BMS
Now we can add and plug and call it for the day but we can also add a BMS which adds over charge, over discharge and some of the also add Balance charging to the battery pack. we just have to solder it to the battery pack as shown on the board. Also, some BMS like mine does not offer Balance charging so you need to add and Balance charging connector and You are done!
If you want to know more information about us, please Send Us An Inquiry or Email, welcome to visit our company and factory in Shenzhen, China.
Contact Us
- Shenzhen Doublepow Energy Technology Co., Ltd.
Product Categories
New Products
-
Customized 3.6V 800mAh AAA rechargeable nimh battery pack
-
Rechargeable HHR-P107 ni mh batteries aaa 800mah 3.6v battery
-
Customized Size 3.6V NIMH 700mah AA rechargeable nimh battery pack for electronic products
-
Cordless Telephone Battery HHR-P107 800mAh 3.6v AAA size NIMH rechargeable battery
-
Customized 2P 4400mAh 18650 li-ion rechargeable 3.7v battery pack 2 3 4 wire
-
bulk li-ion battery pack lithium ion 3.7v 2P 4400mAh 3.7v 18650 battery packs
-
3.7V 18650 Lithium Ion Battery Cell Rechargeable Li-Ion 7.4v li ion battery
-
high capacity 10500mAh 18650 cell rechargeable batteries li ion battery 3.7v lithium ion batteries
-
18650 battery pack 36V 30000mAh 30Ah 1080WH rechargeable lithium ion battery for Electric scooter
-
High capacity small size rechargeable li-ion battery 11.1v li ion 18650 battery
-
Custom any size 12v Lithium ion 18650 rechargeable 11.1v 5600mah li-ion battery pack for bicycle light
-
Factory Wholesale Rechargeable 18650 11.1v Li ion Battery Pack with DC Connector
-
Custom any size DC 12v 3S6P 18650 li ion battery rechargeable lithium ion battery pack with bms
-
deep cycle life 18650 2800mah li-ion battery 3.7v rechargeable cylindrical single battery with wire and pcb
-
OEM Li-ion battery pack rechargeable 7.4V 18650 pos terminal battery
-
Wholesale OEM 12v 16ah 18650 rechargeable lithium ion battery
-
OEM 18650 battery pack 12v 12ah Rechargeable lithium batteries for Home Energy Storage
-
Deep cycle life 18650 lithium battery pack 12v 12ah Rechargeable lithium batteries for solar systems
-
Factory price Energy Storage lithium ion 12v 8ah battery with BMS
-
Long Cycle Life Lithium ion Rechargeable 12V 14Ah Battery Packs
-
deep cycle rechargeable 12V 6A 18650 lithium ion battery pack for Solar Alarm System
-
Full high capacity rechargeable 7.4V 3600mAh 18650 li ion battery pack standby battery
-
Factory Custom 11.1V 2200mAh Li ion rechargeable 18650 battery pack for RC Helicopter
-
Rechargeable li-ion 2000mAh 11.1v lithium ion 18650 battery pack with connector plug for Airplane RC Helicopter Drone
Popular Searches
- digital tester
- Resistance Tester
- electrical instrument
- test instrument
- lab equipment
- analysis instrument
- laboratory instrument
- Asphalt Mixture Mixer
- launch x431 master
- x431
- Gloss Meter
- Resistance Meter
- digital instrument
- dc load bank
- testing equipment
- testing machine
- battery load bank
- Circuit Tester
- Impact Tester
- lab instrument
- weather station
- gps receiver
- laboratory instruments
- test equipment
- laboratory equipment
- electronic timer
- electronic meter
- electronic instrument
- Electricity Meter
- data collector
Recommended Products
- Handheld ultrasonic concrete crack scanner Ultrasonic testing for hidden cracks in concrete Real-time concrete crack monitoring system
- Automated crack mapping with UPV Best ultrasonic crack detector for concrete Price of portable UPV crack measurement tool
- Time-of-flight (TOF) crack depth measurement Surface wave testing for crack detection Digital ultrasonic concrete testing device
- Tunnel & dam crack inspection with UPV Building structural crack assessment tool Ultrasonic pulse echo for concrete cracks
- Bridge inspection ultrasonic crack detector Concrete slab crack measurement equipment Highway pavement crack depth analyzer
- Portable ultrasonic concrete crack gauge Non-destructive ultrasonic crack depth tester Concrete crack width and depth measurement tool
- Ultrasonic concrete crack depth meter Ultrasonic pulse velocity (UPV) crack detector NDT ultrasonic crack measurement device for concrete
- Handheld device for measuring surface cracks Automated crack detection system for quality control Real-time crack monitoring equipment
- High-precision ultrasonic crack detector price Compare crack width measurement systems NDT crack detection equipment suppliers
- 3D scanning for crack depth analysis Best crack depth measurement device for industrial use Affordable portable crack inspection tool
- Time-of-flight diffraction (TOFD) crack measurement Laser-based crack width measurement Digital microscope for crack analysis
- Metal fatigue crack testing device Railway track crack inspection equipment Phased array ultrasonic testing (PAUT) for cracks
Find Similar Products By Category
- Instruments & Meters > Test Instrument > Test Machine
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Shenzhen Doublepow Energy Technology Co., Ltd.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
sales
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile