Separator machine used for palm kernel can cracker and separater

 Introduction of palm kernel cracker and separator system

Nowadays there are more and more small or big palm oil mills in Nigeria, after processing palm fruit, there are much palm nut and fiber remained. Fiber can be as animal feed or fertilizer. While they do not know how to deal with palm nut because of hard palm nut shell. In fact, palm kernel oil is more valuable than palm fuit oil. Palm kernel oil is more expensive than palm oil in the supermarket.

Our palm kernel cracker and separator system is our company newly developed palm oil project mating system. 
This system abandoned traditional technology, adopts cracking and air separator method, it is high efficiency and no pollution. Especially for like palm kernel (Shell thickness ≤1.4mm), 

After crushing the palm nut, the shell and kernel weight is very close; To separate it is a very complicated process; We adopt professional palm kernel cracker, crushing rate is above 90%; Then use air separator system, through adjusting the transducer to control high pressure air speed and volume; When the speed and air volume arrive the critical value, which can separate the shell and kernel; Kernel in shell rate is less than 5%; shell in kernel rate is less than 5%; This system is mainly for cracking and separating palm kernel.

The folllowing is palm kernel cracker and separator system, our minimum capacity is 2-3tph, It is a complete line.

The followings are palm kernel seed and palm kernel shell after cracking and separating:

palm kernel seed as the following :

Palm kernel shell as the following:

Pictures of palm kernel cracker and separator system

Palm kernel oil processing machine, palm kernel oil production line introduction:

When you get palm kernel and palm kernel shell, you can sell kernel to palm kernel oil processing factory, You also can set up your own palm kernel oil processing factory using our palm kernel oil production line. About palm kernel shell, it can be burnt as fuel.   If you wan to set up a palm kernel oil production line, you need use the following machines:

 

Palm kernel cracker and separator system will be packed in wooden case or according to the customer's requirements.

Why is Doing?

1. More than 40 years experiences in oil machine field.
2. Good quality control in production process.
3. 26 technical engineers research on new efficient processing craft and instruct manufacturing and installation.
4. 76 technicians-professional installation team-with rich and mature installation and training experience.
5. CE and ISO9001
6. Pre-sales Service
Work as your technical assistant, special design for you according to your site, construction condition and other requirements.

7. Sales
a. Install and debug equipment according to contract;
b. After sales engineer will help you do prepare works for the first start up and debug for you;
c. In the working site, we supply operation and serviceman for free. Besides, we can make sure operator can get hold of usage, working requirement, correct maintain way and diagnose remove corrected when machine broke down.

8. After-sales Service
a. Remind user maintain machine for certain time each year;
b. Guarantee spare parts for free;
c.Out of warranty period, we can supply paid service and spare parts all time.

Henan Doing Mechanical Equipment Company is specialized in palm oil machines, palm kernel oilmachines, crude oil(CPO&CPKO) refinery and fractionation.

We offer both production machine line and single press machines:

Our palm oil mill capacity includes: 5TPH, 10TPH, 15TPH, 20TPH, 30TPH,50TPH, 60TPH, 80TPH, 100TPH, 120TPH and bigger capacity.

Small size palm oil mill capacity: 500KG/H, 1TPH, 2TPH

Our palm kernel oil mill capacity includes: 10tpd——600tpd and bigger capacity.

1. How can we see the working machines?  
You are warmly welcome to visit our factory, our engineers will explain you the machines details one by one.

2. How can we choose the right model number oil press?
You can choose the right model number according to the raw material you use and the output capacity you need.

3. Will you offer training?
Yes, free training will be offered after the installation.

4. What is your guarantee time?

At least one year with all necessary after-sale service provided.

5. Where is your factory?

Our factory is located in Zhengzhou city which is the capital of Henan province, China. It is very convenient for you to visit here, no mater you come here by train or by air..