Strut Press2pc Heavy Duty Coil Spring Compressor Tool

• Drop forged jaws & lead screws screws 350mm/14 inch both heat treated to ensure professional performance.
• Use Externally to Compress MacPherson Strut Coil Springs
• Permits Quick and Safe Removal or Installation of Springs
• Zinc Plated Compressor Fit Most Macpherson Strut Sizes
• Drop Forged, Heat Treated Steel

Strut Coil Spring Shock Compressor make you complete the suspension work for your vehicle that involves removing coil springs, you will need a strut compressor.It's important that you go for a heavy duty strut spring compressor due to the amount of strain the spring is under.

How to use

1>Affix one leg of tool. Hooks on both ends of leg should engage coil spring

2>Be sure that movable hex nuts are threaded onto bolt and seated in hex holes of double hook. Hand tighten bolt.

3>Affix second leg of tool on opposite side of coil spring in same manner as done for first leg. Hand tighten bolt.

4>Apply safety hooks to spring with flange and wing nuts. Assemble to each leg and coil spring. Wing nuts should be finger tight

5>Compress coil spring using hand tool or impact gun with 15/16" socket. Turn each bolt alternately so that compression of spring is equal on each side.

6>Compress until the ends of the spring are completely free of the spring seats at each end of the coil. Total compression required isusually not more than 3"

7>Remove upper bearing dust cap on MacPherson strut to expose piston rod nut.

8>Remove piston rod nut, upper bearing plate and upper coil spring seat.

9>Remove coil spring in compressed condition and set aside. Shock absorber is now exposed to be fixed or replaced

10>Reassemble all components in reverse order. Be sure coil spring seats are reassembled so that they match ends of coil spring.

11>Loosen each leg evenly and allow the ends of coil spring to contact the seat properly. Remove each leg.

12>Repaired MacPherson Strut is now ready to be reinstalled on vehicle.

• Drop forged jaws & lead screws screws 350mm/14 inch both heat treated to ensure professional performance.

• Use Externally to Compress MacPherson Strut Coil Spring

  Permits Quick and Safe Removal or Installation of Springs

• Be designed to be the most heavy duty and safest spring compressor available

COSTOMER CHOICE

You can also choose

   Cangzhou YAQIYA Auto Parts Manufacturer Co., Ltd is located in Huaizhen Industrial Zone, Xianxian, Cangzhou city, Hebei Province, China, which specializes in manufacture and export various of wheel balance weights (adhesive wheel weights, clip on wheel weights), tire valves (tubeless tire valve, tr412, tr413, tr414, TPMS valves, truck tire valves), tire repair seals (tire plug), tire repair patches (cold patch), tire repair tools, tire mounting paste and so on.

  The YAQIYA company has been developed very fast, the enterprise management, employe quality, technical equipment, production technology and supporting facilities, etc. All have achieved international standards, so that the company take the leading position in the same field in the country. At present, with an annual output of 3000 tons for various wheel weights.