Contact Platform Support
Help CenterCARBIDE PUNCH ROD
Related Products
Xiamen Betalent Carbide Co., Ltd, carbide products inc , is a company focus on designing, producing, and selling cemented carbide materials and cemented carbide products, tungsten carbide products, carbide product,etc. We also provide carbide cutting tools, carbide cutter, cemented carbide, wear parts, best punching rod, carbide punches and dies, punch and flaring dies and so on.
Punch rod is an important part of cold heading die. The work of punching or stamping die is continuous operation, so the service life requirement of hedge rod becomes the key point. The high hardness and wear resistance of cemented carbide material can meet the life requirement of punch rod, hence carbide punch rod is more and more popular.
According to the different material and thickness to be punched, different tungsten carbide gradess should be selected. Generally, the thicker the stamping product is, the lower the hardness and the better the toughness of cemented carbide is. The harder the material is, the harder the cemented carbide is, the lower the hardness of the cemented carbide is, which can effectively prevent the punching rod from being damaged. For the thin plate or the low hardness, the tungsten carbide punch can be used for hole processing of the product, so as to improve the service life of the punching rod.
Send Inquiry to This Supplier
You May Also Like
-
WIRE STRIPPING BLADENegotiableMOQ: 100 Bags -
WIRE STRIPPING BLADENegotiableMOQ: 100 Bags
-
2 FLUTE, 0.5 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTERNegotiableMOQ: 100 Bags
-
2 FLUTE, 0.6 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTERNegotiableMOQ: 100 Bags
-
2 FLUTE, 0.8 MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTERNegotiableMOQ: 100 Bags
-
2 FLUTE, 18MM FLAT CARBIDE END MILL, MILL CUTTERNegotiableMOQ: 100 Bags
-
2 FLUTE, 5MM BALL NOSE END MILL, SMALL DIAMETER MILL CUTTERNegotiableMOQ: 100 Bags
-
3 FLUTE, 16MM FLAT CARBIDE END MILL, MILL CUTTER FOR ALUMINUMNegotiableMOQ: 100 Bags
-
4 FLUTE, 0.2 MM FLAT CARBIDE END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEELNegotiableMOQ: 100 Bags
-
BALL NOSE END MILLUS$ 10 - 100MOQ: 1 Set
