Long service life precast concrete eps/ceramsite lightweight composite wall panel making machine

1.Automatic raw material feeding --metering -mixing system, accurate measurement to ensures proportion stability
2.The Mixer is double -shaft, stable and convenient operation . Beside, the blade is only 3mm to the mixer wall so that can guarantee mixing even.End of shaft has four seal, no oil leakage, no slurry leakage , automatic oil filling maintenance.
4.For big capacity, we will equip second mixer ,thefunction of second time mixer , one is to store the slurry, the other is to shorten the mixing time,so as to increase the production capacity, and the third is to prevent the slurry from solidifying and make the slurry more uniform.

1.We use the pump to cast the slurry into the mould car, in this way, the slurry will be more even
2.Reduce the bubble of the wall panel ,to make sure the flatness of both surface
3.to protect the integrity of the calcium silicate board, ensure the compactness on both sides of the panel
4.It can keep the working platform clear without wasted raw material.

Automatic open mold, automatic unloading board,automatic flip de-mould. Reduce labor intensity of workers, improve production efficiency, and save labor costs

High-quality carbon steel inner skeleton, high strength and durability of the clapboard,the thickness of the cold-rolled steel plate 1.5 to 2mm)

The steel plate adopts laser cutting processing technology with high dimensional accuracy

After curing, automatically unloading the wall panel and stacking.
1.We have full automatic demoulding system to reduce the working strength, this is our patent technology, and it is very mature now.
2.Automatic pull out the panel and stack automatically. It can save the labor cost
3.Optimized structural design, using high-strength high-quality carbon steel to meet stringent conditions of use;
4.The turning platform uses double hydraulic cylinders to output power, and the platform is more stable and not easy deform
(Example: sufficient material consumption is 1.8 tons, weight is 3 tons, 2.4 meters is 4 tons, and 3 meters is 3.8 tons.)
5.The original bottom mold pressure beam structure design, automatic hydraulic compression, convenient and quick operation;

Lower material cost, higher profit

Lightweight and energy-saving composite wall panel is made of industrial waste fly ash, slag, ceramics, portland cement and EPS foam particles as the main raw materials. The production process is simple, the cost is low, and the economic benefits are considerable.

Advanced technology
The industrialization and commercialization of residential construction in this century have been irreversible. According to the development of wall materials in developed countries, the product is in line with the development law, which overcomes the defects of other lightweight wall panel, has unique performance, and will be the leader in new wall materials.

Broad source of raw materials
Housing and human beings are the most inseparable. They are long-term durable consumer goods, and they are also the most expensive and largest human products. This requires that the source of raw materials for the production of wall panel must be rich and extensive. The wall panel uses industrial waste fly ash, slag, and EPS foam particles as the main raw materials, which are environmental friendly; at the same time, low-cost ordinary chemical raw materials are used as the main raw materials, and both raw materials are abundant and widely sourced.

Lightweight panel has obvious competitive advantages in industry
The weight is more lighter
The thickness of wall more thinner
More easy to install, take a modular assembly, saving installation time
Higher strength, more anti-aging
Higher energy efficiency
More waterproof
The fireproof performance meets the national A standard and it is non-combustible;
Non-toxic, harmless, non-polluting, non-radioactive, it is a green building material

Low Operating Risk
1)Long-term and stability advantages: Once a wall material is successfully developed and recognized by the government and society, its market competitive advantage is relatively stable and its operation has a long-term nature."
3)Product production mechanization, higher production capacity, less workers needed, high stability.

sandwich panel, with surface board:
1. Calcium silicate board
2. Fiber cement board
3. Mgo board

lightweight solid panel, without surface board
More lightweight and save cost of surface board

1.Interior wall :90/100mm ,some place can be 75mm
2.Exteriro wall :≥150mm ,180mm/200/220mm
3.Roof :75mm
4.Floor :120mm +each 60mm add a cross bean
5.Fance wall :75mm