Forged Wholesale Brass Compression Water Gate Valve DN15 Italy tType Brass Gate Valve

J1006 Forged wholesale Brass Compression water Gate Valve dn15 italy type brass gate valve 

GATE VALVE IN BRASS - PN16

SUITABLE FOR DOMESTIC WATER SERVICES, HEATING, AIR-CONDITIONING PLANTS.

Female/female threads.

Handle in steel.

Body in brass.

Minimum and maximum working temperatures: 0°C, 150°C in absence of steam.

Threads: ISO228 (equivalent to DIN EN ISO 228 and BS EN ISO 228).

NPT threads also available

INSTATION

1.       Thoroughly clean and prepare the piping system before valve installation.

2.       Remove the valve end caps if present, and inspect the valve ports and seating surfaces for cleanliness just prior to installation.

3.       Support the valve to prevent unnecessary stresses induced by connecting pipe.

4.       Be sure the rating of the valve is compatible with the intended service conditions.

5.       Operate the valve from the full open to closed position.

6.       PTFE thread sealant is recommended when making up connections. Consult the sealant manufacturer’s instructions for proper use. Install on pipe and not the valve.

7.       Care should be used to not over tighter the valve onto the pipe, as it is possible to distort the internal parts of the valve.

8.       Because brass is a softer metal than steel, always put the pipe in a vise and turn the valve onto the pipe end. Always use a smooth-jawed wrench on the valve end on the same side of the valve to which the pipe or fitting is being installed to prevent distortion of the internal parts of the valve or transmission of torque and stress into the body joint. Pipe wrenches should be used on pipe and fittings only.

9.       Tale precaution also to prevent loosening body to tailpiece connection by reverse rotation during installment/alignment. Such loosening could compromiser body to tailpiece sealing.

10.   Verify the tightness of the packing nut after installation.

OPERATION

1.       Ball valve are designed to be opened by rotating the lever handle in a counterclockwise direction, and closing in a clockwise direction. The handle indicated the ball port direction.

2.       Under certain conditions, throttling flow in the near-closed position can destroy the valve seats. Consult factory for throttling service.

INSPECTION & MAINTENANCE

1.       Periodic inspection and preventative maintenance is not required other than adjustment of stem packing, and cycling of the valve from open to closed position.

2.       If a valve develops a packing leak, adjust the packing nut to increase the pressure in the stem packing. The packing but should be turned in a clockwise direction approximately 1/4 turn, or until the leakage stops. It is not recommended that valves be repacked while under pressure. Remove system pressure before starting.

3.       Repair or replacement of two pieces ball valves internal parts is not recommended. Damage can occur to the body and tailpiece during disassembly that would make the valve inoperable.

Technical standard:

1.Nominal Pressure:1.6MPa.

2.Working Medium:Water. Non-causticity liquid & Saturated steam(≤0.6Mpa).

3.Working Temperature: -20°c≤t≤100°c.

4.Parallel Pipe Thread to ISO228/1,BSP,NPT,etc.

5.Size:  15mm.22mm.28mm .

6. The body is forged with brass C3771, C37000, CW614N, CW617N, etc.

7. The valve is used for connecting or cutting off the medium in pipelines.It is easy to be installed and enjoys the advantage of small fluid resistance, labor-saving operation, and unconstrained flow direction.

8. The wheel is made of HT200 gray cast iron.

2.Advantage:

1)       Fast Material Supply. Have own copper bar Factory of Group.

2)       Every valve put through a six-step QC process before delivery.

Material Control, Machining Quality Control, In-coming Material Inspection, Assembly Line Quality Control, Leakage Testing, Final Inspection Before Delivery.

3)       100% Leakage Test.

4)       Strictly and perfect management in production.

5)       Guaranteed Quality In Competitive Price.

6)       On-time Delivery.

7)       Complete R&D facilities and Excellent team.

8)       Annual R&D projects reach the number of 100.

9)       Have rich experience and strong ability to develop new products..

Precautions

1) Carefully bump when transporting, do not damage the external control line and control components.

2) Installation of pipelines shall be equipped with automatic exhaust valves in accordance with relevant regulations to ensure no water column interruption occurs.

3) Thoroughly remove the debris from the pipeline before installation and flush the pipeline before passing the water.

4) The valve must be installed following the media flow indication, and it is necessary to install and check in accordance with the relevant specifications.

5) Do not expose the valve to freezing temperatures

Ningbo JKlong Valves Manufacturing Inc. founded in August 1998, is the subsidiary company of Ningbo Jintian Copper (Group) Co., Ltd., one of China’s Top 500 Enterprises. The company is devoted to R&D, manufacturing, sales and service of brass valves, the products widely used in the fields of water supply and drainage system, gas system, urban heating, HVAC and ancillary products etc., which mainly cover brass valves, gas valves, heating equipments and sanitary wares, water meters and various kinds of pipe fittings, sales network throughout 32 provinces of the country with nearly 400 sales outlets, top ranks in the processing of civil brass valves of low pressure in China.

Ningbo Jintian Copper (Group) Co., Ltd., as corporation of JKlong Valves with full amount investment, listed No. 282 of Top 500 Enterprises of China, is the largest copper processing enterprises and the first “Urban Mining” demonstration base of China. The enterprise technology center, with its own perfect R&D system, strong technology strength and fruitful scientific research, is identified as “State-Level Enterprise Technology Center” by National Development and Reform Commission.

JKlong Valves has passed three management system certificates such as ISO9001, ISO14001 and OHSAS18001. “JKlong” brand was honored as “China Famous Brand”, and JKlong Valves was award the title of “High-tech Enterprises”,“Famous brand of Chinese Valves”. The company adheres to the concept of science and technology enterprise, focusing on products R&D and technological innovation, with dozens of products patents. The company owns a rich industry experience R&D team, equipped with industry-leading automated production equipment and testing equipment. JKlong products are effectively ensured high quality since the company takes customized Jintian copper bar as the material, adopts advanced infrared temperature measuring system for hot-pressing forging technology, CNC multi-axes finish machining special machine, tri-coordinates thickness gauge, 100% sealing performance test and valve’s service life testing equipments, reckons on strict products management system as well as whole process monitoring from the material to the finished product, to create the brand advantages that JKlong holds, and win the acceptance and confidence of spacious users.

“Limited resources, unlimited use”, the company always insists on the principle of harmonious development with circular economy and new-type industrialization, keeps cleanness production, Create brand together, share achievement together, win from cooperation together, build harmonious together”, we are willing to collect our wisdom to make the “JKLong” become the first brand even the world famous brand of this line with continuously offering fresher and better service. Service exists everywhere, details show sincerity. Our faithful service is the key to your better life.

Contact Us

Ningbo Jielong Precision Manufacturing Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Ningbo Jielong Precision Manufacturing Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now