3ply Medical Nonwoven Melt Blown Surgical Face Mask With Ear Loop Face Mask

Product Specification

Scope of Application: It is intended for use by clinical personnel during non-invasive procedures and covers the mouth, nose, and jaw of the user. 

strong>Condition of Storage and Transportation : Well-ventilated and Non-corrosive Storage. Protection from moisture and sunlight during transportation.

How to wear a facemask

1. Before use, check whether the packaging is in good condition and confirm the expiry date of the product.

2. Open the packaging, take out the mask, extend and pull the mask to the face with hands and keep the metallic strip uppermost and the side with folds downward outward; press the metallic strip from the nose bridge to two sides with fingertips to mould the metallic strip over the nose bridge and the masak over the face.

How to clean a facemask?

You can rub the mask gently with soap, detergent, etc. Rub the dusty areas well. If the force is too strong, the fabric of the mask will become loose and reduce the dustproof function. So don't use too much force.

After washing with soap, the mask is then rinsed. Rinse the soap and washing powder on the mask.

The mask should be cleaned with soap or detergent and then boiled or scalded for disinfection.

After washing it, let it dry in a sunny and well-ventilated place. It must be well exposed to the sun, so that it can better disinfect and remove bacteria.

Product Structure

Disposable medical mask is composed of mask body, mask band and metallic strip. The mask body is made of non-woven fabric and melt-blown nonwoven fabric. The metallic strip is made of flexible materials. 

Where to buy Medical Surgical Face Mask

Chengdu Yidong Huiyun Science and Technology Co. , Ltd. to create a complete health industry ecological chain from the selection and control of Medicinal Materials, R & D and Production, prevention and health care to seeking medical treatment and seeking medical treatment, cover multi-category product development, rare medicinal materials selection, physical and mental health management, chain pharmacy expansion and other projects.

Production Environment: In compliance with GMP D class clean production workshop, the staff all wear masks, gloves and gloves for operation; workshop temperature and humidity testing, at any time for disinfection work.