asphalt Wheel Tracking Device Specimen Molding Machine pneumatic rutting Roller compactor

DESCRIPTION:

The Roller Compactor is considered to be the method of laboratory specimen compaction that results in slabs of asphaltic paving materials with properties that most closely simulate those of materials in the highway. Slabs can be compacted to target mixture densities using loads that are equivalent to those of full-scale compaction equipment.

There are pneumatic and hydraulic two model. QCX-4P is pneumatic powered and controlled by a programmable logic controller (PLC) connected to an HMI which the

operator can use to select the number of passes. QCX-4H is driven by hydraulic system. A manual pressure control is adjusted to set the required load.

SPECIFICTION:

MODEL QCX-4P/QCX-4H

Size of test mould: 300×300×50(100)mm

Rolling and compacting wheel: Radius: 500mm ,Width: 300mm

Speed: Variable up to 10 cycles per minute

Trolley Travel: ±150 mm

Preheat temperature of rolling wheel: 120 celsius degree

Pressure of rolling wheel: 300N/cm

Instrument size: 1800×1200×600mm

Power: 380V 1800W

Contact Us

Zhuozhou Tianpeng Imp.&Exp. Trade Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  Zhuozhou Tianpeng Imp.&Exp. Trade Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now