Bond strength usage pull-off adhesion tester

Maximum pressure: 2.5 tons
2500N/S (MPa)
Accuracy: 0.5%.

PRODUCT PERFORMANCE AND TECHNICAL INDICATORS

1. SR-Lift Pull-Off Adhesion tester conforms to several foreign standards: ISO4624, ASTM D4541 and ASTM D7234.
2. Consists of Actuator, Load sensors, LCD display device, Dolly (Φ10, Φ14, Φ20 and Φ50), Cutting tool (Φ10, Φ14, Φ20 and Φ50), Caking agent and Computer software.
3. Technical parameter
Maximum pressure: 2.5 tons

2500N/S (MPa)
Accuracy: 0.5%.

INSTRUMENT DESCRIPTION

1. Serial communication port: Communicate With the computer through RS-232 serial communication port through which stored test data can be transmitted to the computer. Test results can be printed out by the provided software.
2. Sensor input port: Through shielded wire of sensor and straight load sensor to measure adhesion force.
3. Zero adjustment potentiometer: allow to manually adjust the initial value of sensor to zero.
4. Calibration potentiometer: calibrate the sensor
5. Power switch

Packing dimension: 320x440x500mm export standard carton

Lead time: within 7 days after payment