Diesel Injection Pump Tester XBD-619S On Hot Sale

                                              Bosch Equivalent Diesel Injection Pump Tester XBD-619S On Hot Sale

Functions

1. Measurement of each cylinder delivery at any speed

2. Checking and adjust the mechanical governor

3. Checking and adjust the distrbutor pump

4. Experiment and adjusting of behavior of supercharging and compensatory device

5. Measurement of oil return of distributing pump

6. Testing of the electromagnetic valve of distributor pump  (12v/24v)

7. Measurement of the internal pressure of distributorr pump

8. Checking the sealing of injection pump body

9. Install tube of auto-sucking oil supply can check on oil supply pump

According to the different pump. the test bench use proper attachment , and carry out the following debugging
1 Test different cylinder oil supply condition and oil supply evenness under different revolution
2 Test oil supply starting point and interval angle
3 Governor working performance checking and regulation 
4 The pressure compensation performance test and checking
5 The distribution pump working performance test and regulations
6 The cold starting device and solenoid valve performance checking
7 The distribution pump oil return test under different revolution (optional)
8 The distribution pump inner pressure test under different revolution  
9 The injection pump seal performance test
10 Check the oil transfer pump self priming performance
11 The built-in high reliability horizontal type inflation pump
12 Three “T” type working bench, wide location bracket, with steady running
13 The attached too box, the service tool and special tool is conveniently taken!
III The main technical data of test bench
1 The principle axis revolution: 0-4000r/min. the two directions is optional
2 It can test oil injection pump cylinders is 12
3 The principle axis revolution fluctuate: ±1r/min
4 The host machine power : 5.5KW ,7.5KW,11KW,15KW,18.5KW,22KW.
5 The oil supply drive motor power : 1.1KW
6 Principle axis center to center spacing working bench height : 125mm
7 The oil metering counting : 0-1000 times , one gear per 50 times
8 Revolution .counting, toothed bar stroke, in advance angle, four digital display
9 The pressure, oil temperature display: three digital display
10 The oil temperature automatic control: 40°C±2°C
11Gas source pressure: 0-0.25Mpa
12 The oil tank volume: ≥ 40L
13 The oil pump oil supply: ≥ 10L/Min
14 The oil filter precision: 5μ
15 The glass measuring cylinder volume:
Big measuring cylinder: 150ml
Small measuring cylinder: 45ml
16 The oil pressure meter 1.5 grade : 0-0.6Mpa;0-6Mpa;0-0.16Mpa;0-1.6Mpa.
17 The standard injector: ZS12SJI
18 Cooling method: forced wind cooling
19 Test bench overall dimension (mm): 2300×1160×1780
20 Test bench weight: 1200Kg
We can create special requirements for other models test bench, based on customer requirement