42lb 440cc EV1 Fuel Injectors for GM LT1 LS1 LS6 Ford Mustang SOHC DOHC

1.Product Description

 42lb 440cc EV1 Fuel Injectors for GM LT1 LS1 LS6 Ford Mustang SOHC DOHC

Condition: New
Manufacturer Part Number: 0280150558
Interchange Part Number: 0280155968
Other Part Number: 0280 150 558 0 280 150 558
Placement on Vehicle: Left
Fitment Type: Direct Replacement

Set 8 42lb 440cc EV1 Fuel Injectors for GM LT1 LS1 LS6 Ford Mustang SOHC DOHC
ONE YEAR WARRANTY

Note:These High Performance Injectors will require ECU Tuning, pls verify the 42lb flow rate meet your requirement.

These High Impedance fuel injectors are not made by the original equipment manufacturers(OEM)(BOSCH & VDO etc.)They have been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injectors.The individual flow characteristics and fuel atomization of above fuel injectors are almost same to or superior to the OEM and will help accelerate response time , save gasoline and improve MPG.

Quantity: 8 Fuel Injectors
Condition: 100% BRAND NEW
Design: Bosch GEN III EV1 Style Fuel Injector
O-Rings Included: Yes, preinstalled
Injector Design: Metal & composite plastic
Nozzle Design: 1 hole disc
Connector Type: EV1
Filter Design: Basket filter design at inlet
Spray Pattern: 15 Degree Spray Cone

Specification

Coil Resistance: 12 Ohms / High Impedance
Static Flow Rate: 42 lb/hr = 440 cc/min @ 43.5PSI ( 300kPa )
Gain: 0.12ms/MG
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 300KPa
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Length: 3" (74mm)
O-Ring Diameter: 14.5mm

2.Compatible 

Please contact us for more dtails 

 

3.Packing&Shipping

Standard Carton packing, PP bag - Box packing-skin packing-Blister packing-Neutral packing...etc,
Or as customer`s special request.

Standard Carton packing, PP bag - Box packing-skin packing-Blister packing-Neutral packing...etc,
Or as customer`s special request.

Air Shipping(DHL FEDEX UPS EMS) will be take 5-7 work days.
If it is our stock parts, we can ship out winthin 24 hours after we received the payment.
If it is customized goods ,then we need about 7-10 work days to prepare and produce.
Normally ,It will take 15-20 work days and shipped  Pallet & Container by Sea .
When you need a large quantity for each item, we usullaly need ship by sea to save your shipping cost .usually,we use pallet LCL,and container FCL.

5.Warranty:

Please check the quality and quantity of goods when you received the goods ,Make sure what you have got is good.
 If you have any questions,please contact us at the first time.we will do our best to help you .
 We will offer you professional explanation since your satisfication is our main priority .
 Limited Time:3 Weeks

6.Our Service

We have fouced on Auto Parts and ATV Parts for many years ,we have earned a lot of Auto parts knowledge, information and good supplier ,and our parts can be fit with for atvs,dirt bike, scooter go kart, UTV and motorcycle.

In addition to that,we also have a Hunting team who can help you to finding auto parts, offer you a wanderful one-stop shopping experience .