Compressor 0012300011 0002309111 A0002306511 Suit for MERCEDES

Denso Compressor 0012300011 0002309111 A0002306511 Suit for MERCEDES

Pay attention on Air Conditioner Using

A.No Water in air-conditioning Manipulator
Special:
1) After stopping the vehicle, you should turn off the cab around doors and windows to prevent the weather rain soaked manipulator caused damage
2) Close cab around the doors and windows to prevent the manipulator water damage, during vehicle cleaning
B. Prohibited taking apart the ac Manipulator without permission
C. Do not use air conditioner when the manipulators failure lights

Automotive air conditioning compressor installation instructions

1. Please understand that the compressor is only responsible for air conditioning compression work, not responsible for refrigeration. No leakage, no abnormal sound, the pressure is enough qualified products.
2. due to not install the auxiliary fan or cooling condenser surface is too dirty, the use of air conditioning, the heat will cause high temperature, resulting in high compressor pressure is too high, causing the compressor and clutch easy to damage.
3. the original car compressor has been damaged, that is the original car air conditioning system has been a problem, and cause air conditioning compressor failure reasons are as follows:
(1) poor heat dissipation, too much fluoride, resulting in high pressure is too high to the compressor load, resulting in pressure plate and connecting rod parts damage or charred lock;
(2) the use of vehicles for too long, the compressor aging organic carbon, resulting in pipeline congestion, or drying bottle failure, can not filter the water, causing ice blocking;
(3) pipe assembly is not installed fixed for a long time swing, resulting in loose air leakage.

Before replacing the compressor, be sure to perform the following steps:

(1): the system within the pipeline separation cleaning, cleaning agent poured into the pipeline condenser, evaporator soak for about 20 minutes. And then high-pressure nitrogen to the cleaning agent and dirt together out. Do not clean the compressor dry bottle, plower, throttling tube. And to ensure that no cleaning fluid remains in the system and, if necessary, dry the refrigerant circuit with nitrogen;
(2): the condenser, the evaporator surface clean, check the cooling fan speed is normal;
(3): expansion valve cleaning or replacement, drying bottles and pipe filters must be replaced;
(4): Before installing the compressor, check and correct the oil and viscosity of the oil. Vacuum, filling, check the high and low pressure, the general normal pressure is 180-200Psi low pressure of 30-40Psi If the pressure is not normal, please diagnose the reasons after the installation.
(5): Check and correct the oil and viscosity of the oil and install it again.

Our Factory Advantages

Air compressor: 

over 50,000 sets / month; Advanced and complete equipment South Korea fully automatic assembly line and semi-automatic assembly lines: 3 lines Japan little giant processing center: 12 sets; CNC machining bed: 16 sets Very strict from procurement of raw materials to performance test of finished products to ensure quality.
Production equipment:
Little giant processing center
Full automatic keycap assemblyMachine tool
Cooling machine
Full automatic keycap assemblyElectronic-control rotating arm
Piston and hemisphere matching

Using the most advanced running equipment (since research and development)
1: the bottom of the piston and the cylinder burr, the ball smooth running.
2: in the process of running out of the whole system to get rid of the way the compressor in the over and over the secondary damage caused by cleaning or cleaning dust is not clean and so on.
3: completely exclude the compressor due to obstruction caused by no cooling or lock the return of the problem.

Please Click on this picture to enter Compressor Catalog

Please click on product names to access the product Catalog

Huangshan Benma group Co.,Ltd - ISO

◆Founded in 1999 in Huizhou District Industrial Park,Huangshan,Anhui
◆With more than 2 decades experiences in Auto parts
◆20 million US dollar investment
◆3 factory and more than 500 stuffs 3 sales Team
◆More than 18,000 square meter space
◆Factory own assets more than 60 million and more than 500 stuffs
◆HF Brand friction plate occupy 70% market share
◆Auto trading company with 4 years export experience