Nylon Ink

 High-gloss waterproof nylon fabric screen printing ink

1. Substrates:

Waterproof nylon fabric、non-waterproof fabric、luggage fabric、 Oxford fabric and nylon plastic.

2. Product features:

High-gloss、good softness、strong coverage、good adhesion on high waterproof nylon fabric.

3. Test items&results:

4. Technical parameters:

5. Instructions:

(1) Mesh: 150-350(60-140T) polyester mesh.

(2) Squeegee: Polyurethane squeegee at the hardness 65-85 is recommended.

(3) Indicative dosage: 30㎡/㎏ on the 200(80T) mesh

(4) Drying: natural drying (surface drying in 7-15 mins, full drying in more than 24 hours) or blow drying at temperature below 100℃.

(5) Selective Solvents: quick drying water 719, medium drying water 718 or  cyclohexanone based on printing conditions.

(6) Stencil cleaning: organic solvent (e.g. stencil cleaning water)

6. Notes:

(1) Please pay attention to the solvent′s dissolving capacity while diluting the ink.

(2) It will cause pattern scratch by the stack of finished press works on PVC film due to the PVC′s poor solvent resistance. So pay attention to the drying status of ink when finish work and avoid excessive overlap.

(3) Color migration will occur while printing on PVC film containing a lot of plasticizers. The printing ink with good anti-permeability is recommended.

(4) The rigorous sample test before use is necessary to check the printing ink′s adhesion on different waterproof nylon fabrics.

(5) The catalyst 9004 should be added appropriately (by 5-8%) into the ink to improve adhesion when printing on waterproof nylon fabric. But the printing ink with added catalyst must be finished within 8 hours, or will be scrapped.

7. Storage:

It can be stored for 36 months at 5-35℃. Keep away from strong light. Avoid strong acid and strong alkali.

8. Remarks:

(1) Please thoroughly read the instructions and make a sample test before use.

(2) The technical data is for reference only.

THE END