7322BG Radial Angular Contact Ball Bearing 110*240*50mm SUNBEARING

Single-row angular contact ball bearings can only withstand axial loads in one direction, and when subjected to radial loads, they will cause additional axial forces. And can only limit the axial displacement of the shaft or housing in one direction. Angular contact ball bearings have a contact angle of 40 degrees, so they can withstand large axial loads.

Angular contact ball bearings are a non-separable design, and the shoulders on both sides of the inner and outer rings vary in height. In order to improve the load capacity of the bearing, the shoulder on one side will be processed lower, so that the bearing can be loaded with more steel balls.

Bearing capacity is greater than ordinary ball bearings

Can withstand large axial loads or pure axial loads

The bigger the contact angle, the higher the axial load capacity. Small contact angle should be used at high speed

Single-row angular contact ball bearings: machine tool spindle, high-frequency motor, gas turbine, centrifugal separator, small car front wheel, differential pinion shaft, booster pump, drilling platform, food machinery, indexing head, repair welding machine, Low noise cooling tower, electromechanical equipment, coating equipment, machine tool slot plate, arc welding machine.