Environment Salt Spray Test Machine

Salt spray tester for various kinds material’s surface treatment, such as after coating, electroplate, inorganic and organic membrane dermails, negative pole with antirust oil treatment etc anti-corrosive treatment to test the corrosion-resistance of the product.Bo Nute principle draw salt water and then spray, atomization uniform, no crystallization of the blocking phenomenon, to ensure continuous testing, the compressed air nozzle on the way through it leading to the bubble column was wet, the corrosion solution and air nozzle atomized into a corrosive mist, inside the heater to maintain the temperature inside.

Features:

1.Both inner container and outer container adopt epoxy glass entire molding.has the feature of light weight,corrosion resistance,high strength,non-permeation,smooth surface,easy to clean.

2.Salt mist can not be overflow with water seal.clamp cover duct insert heating,which makes temperature increased quickly.uniform temperature distribution.

3.The top cap has been designed with the angle 110 to 120°,in case condensate water will be dropped on the testing specimen.

4.Tower sprayer,it is placed at the middle bottom of working room.the material of nozzle is fired by quartz glass.it can spray tiny fog.the salt mist is setting freely and the has the uniform distribution.

5.The controlling system is put at the top right of machine.which will be convenient for users to operate.There is button of power turn on / off,exhausting fog,spray conversion,two piece of PID digital displaying instrument,timing of running and interval spraying on the panel.also it equip with the over heating protector.

Air supply system:
The air pressure is 1Kg/cm2 in two-stage adjustment.
The first section is to adjust the 2-2.5 Kg/cm2 import type and has the function of filtering oil and water.
The second paragraph is a precision adjustment 1Kg/cm2 1/4PT pressure gauge.

Control System:
With the company's independent research and development control system, it can recover tens of thousands of hours of trouble-free operation in a harsh working environment. Integrate all current test methods (including continuous, interval).

Standard accessories
1 type shelf
2 storage stick
3 standard measuring cylinder
4 temperature indicator pin
5 filter (please replace it regularly)
6 fog collector 80cm2
7 tempered glass nozzle (replaced after 5000H)
8 defogging system