iec60598 defense wind test device for lamp temperature rise test

Safety Aluminum foil iec60598 defense wind test device for lamp temperature rise test

This Draught-proof is designed according to standard IEC60598 and GB7000.1-2007. Applied to provide standard environment condition for lamps product temperature measurement.

The draught-proof applicable under normal operation and is detected lamps temperature air convection under abnormal operation,to prevent the effects of air temperature and thermal radiation from the light source to the sample.

It provides a standard environment for lighting products for testing organization and factory quality control departments. bottom surface of Draught-proof is made of solid wood, the remaining surface is made of a double-layer metal stencil, stencil spacing of 150mm, the ventilation rate of about 40%;

1, the housing structure: double hull rectangular metal structure

2, the door structure: two-door (open outwards)

3, the inner space: 1800x1800x2000mm (LWH)

4, the outer dimensions: 2100x2100x2150mm (LWH)

5, level spacing: 150mm

6, the panel aperture: 2mm

7, the effective orifice area: 40% of the total area

8, Case Material: 1mm cold plate (matt black spray)

9, the bottom of the material: 18mm plywood (surface spray black)

10, reference standards: GB7000.1-2007/IEC60598 Appendix D

 If you need any other messages we are not show here ,please dont hesitate to contact us below ,we will glad if we can help you ,thanks !