CS9912BXJ programmable withstand voltage analysis tester

Carton box package / Wooden box package

CS9912BXJ programmable precision withstand voltage analysis tester

CS9912BXJ programmable precision withstand voltage analysis tester, using the Cortex-M3 core ARM as the master, to achieve the voltage, the current has a high accuracy of 1%. In the application of new standards at the same time, in the aviation, automotive, lithium battery industry has also been widely used. Now nano-materials, graphene and other materials in recent years, a significant increase in the development trend, this instrument is a good solution to the pressure test program.

OSC can detect a capacitive load of a minimum of 10pF for the detection of whether there is an open circuit (poor contact) or a short circuit (short circuit to be measured) in the test.

Variable frequency test, the frequency range of 40.0-400.0Hz, resolution of 0.1Hz.

Constant voltage output: the output voltage adjustment rate of ± 1% range, to avoid the input voltage instability and load changes leaving the output voltage changes, the measurement results are not accurate.

With the rapid discharge function, the tester can be tested in the DC test time 0.2s to be tested body and the circuit in the finished, to ensure the safety of the operator.

With DC test open circuit detection function, to prevent the DC test due to test line off caused by miscarriage of justice.

Zero start to prevent damage to the test piece.

The voltage rises by the time gradient to find the breakdown point analysis.

Can set the current limit alarm and the lower limit alarm function to prevent the test line off caused by miscarriage of justice.

The current offset function eliminates the effect of the leakage current of the test fixture on the test results.

During the test, the size of the output voltage can be changed manually.

With real current measurement function.
With the arc detection test function.
With GFI protection.

Insulation resistance with automatic shift, manual shift function.
Insulation resistance with range maintenance function, can improve work efficiency.

With a keypad lock, the protection test parameters are not modified by the operator.

The front panel software is calibrated and can be calibrated without opening.

Standard PLC interface, RS232C, optional RS485, USB communication interface, GPIB interface.

Company Profile

Shenzhen Bonad Instrument Co., Ltd.

 14 Stanards drafted and issued by Labthink  -- 100 Patents granted by Labthink -- 410 m2 Laboratory to provide testing services  -- 20 years experienced lab technicians to provide solutions -- 12 months warranty  -- Remote Services (Free of Charge allthrough lifetime)

View more

Contact Us

Shenzhen Bonad Instrument Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  

  Shenzhen Bonad Instrument Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now