shenzhen electric shock prevention IEC61032 IP3X IP4X Test Probe C Test Probe D

This product include IEC61032 IP3X/4X Test Probe C / D 2 pieces , pack sell.

Article NO.:BND-C

Made in Shenzhen

Basic Introduction:

1, According to: IEC61032:1997/IEC60529:2001 AND UL

2, IP3X/4X Test Probe C / Test Probe D  is the necessary tool to proceed protecting electric shock test of domestic and similar electrical appliances.

Technical parameters

1,  Test Probe Length :100mm

2,  Test Probe Diameter:2.5mm / 1.0mm

3,  Dam- sphere Diameter:35mm

4,  Handle Diameter:10mm

5,  Handle Length 100mm

6,  According to IEC61032 figure 3 (the Test probe C) /  figure 4 (the Test probe D) 

Application:

1,  Standard test refers to the joint part can't touch the live parts or close to the hazardous parts, and 35mm circular baffle cannot enter .

2,  In the test requirement for preventing from approaching to the hazardous parts,  Test Probe C/D need to exert a 3±0.3N or 1±0.1N thrust. 

Purpose:

This probe is aiming at verifying the basic protection against approaching to hazardous parts.

Note:For the without force products,please use with the dynamometer.