IEC60068 Standard SO2 Salt Spray Test Chamber

Salt Spray Corrosion Test Chambers

Introduction:

Salt spray corrosion test chamber is for surface treatment of various materials, including metal plating, hardware, electronic parts, chemical coatings, baking varnish, automobile, motorcycle, hardware ware, screws, springs, magnetic materials, organic and inorganic coatings, anodizing , rust-proof oil and other industries for quality testing, testing the corrosion resistance of its products.

Specifications:

1. Inner chamber dimension: 900x600x500mm (LxWxH)

2. Outer chamber dimension: 1900x900x1450mm (LxWxH)

3. Temperature: 10℃ ~ 55℃(adjustable)

4. Temperature uniformity: ≤1.0℃ (No load)

5. Temperature fluctuation: ≤ ± 0.5 ℃ (when constant)

6. Humidity range: 85% -95%RH (not adjustable)

7. Heating rate: rise to 40℃(±2℃) within 30 minutes

8. The average relative velocity of the gas to the test sample is: 20-60m/h

9. S02 concentration gas adjustable: 0.05% -1% (volume ratio)

10. Corrosion sedimentation: ≤1.5 (ml/80cm2.h)

11. The tilt angle of the model bracket and the vertical direction: 15 degree (±2 degree)

12. Sprayer: 1pcs

13. SO2 gas: come through the cylinder

14. Power: 220V±10%, 3KW