Home > Products > Rubber/Plastic Testing Instrument > Melt rate flow meter ,melt flow rate tester
Melt rate flow meter ,melt flow rate tester
- 1000 Set / Sets per Month
- T/T Credit Card
- Melt flow rate measurer, plastic melt flow rate tester
- Melt flow indexer,mfi melt flow indexer
- Melt flow indexer test , melt flow indexer meter
- Plastometer melt flow indexer , xnr-400d melt flow indexer
- Supplier of melt flow indexer , used plastic melt flow indexer
- Thermoplastic melt flow indexer , polystyrene melt flow indexer
Product Details
Brand Name: | ZONHOW | Place of Origin: | Guangdong, China | Model Number: | XNR-400 |
Power: | Electronic |
Product Description
Melt rate flow meter
Brief Introduction:
Melt flow rate instrument is also called plastic, resin melt index instrument is used for mensurating melt flow rate when the viscous flow state MFR value, it applies to the polycarbonate, higher temperature of aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department
Type:
1. The digital display
Set the electronic P.I.D regulator for temperature control, which is completely in line with national standards (cannot test melt volume flow rate and melt density).The machine also sets up the counter, which is convenient for measuring cutting time.The instrument works with the cutting and weighing method, and the scope is wide.
2. LCD is fully automatic.
Single chip microcomputer temperature control and program control, under test ended, and automatically display the time needed for a specific volume of the melt flows through the mouth mould, the calculation flow rate value, can repeat of high precision, easy to operate.The system is involved in temperature control.The manual cutting device can ensure the smooth detection by cutting and weighing method when automatic detection is not possible.Compact structure, beautiful shape, high precision, easy to use accessories.
3. Microcomputer controlled automatic.
The melt indexer sets up a single chip microcomputer automatic test device and electronic automatic cutting device.After the microcomputer system has input the corresponding parameters from the light touch key, the test is finished, namely, automatic calculation and printing of flow rate value, high repeatability and convenient operation.The temperature control of the use of computer software technology, which can automatically eliminate because of the power supply voltage fluctuation and the influence caused by environmental changes, and when the temperature of the instrument and the standard temperature thermometer (special correction to match) appeared deviation, the operator can easily random fixed.The electronic automatic cutting device can be automatically cut at the preselected interval to calculate the final result when automatic detection is not possible.
Main application:
Melt flow rate instrument, used to measure the thermoplastic resin melt mass flow rate (MFR), melt flow rate (MVR) volume and the density of the melt, it is not only applicable to the high melting temperature of polycarbonate, nylon, fluorine plastic, aromatic sulfones engineering plastics, also applies to polyethylene, polystyrene, polypropylene, ABS resin, poly formaldehyde resin with lower melting temperature, such as plastic test, widely used in plastic raw materials, products, petroleum and chemical industries, and related colleges and universities, scientific research units and the commodity inspection department.
Features:
1.Using advanced electronic measurement technology, liquid crystal display test results, the micro printer output results and calculating the quality of the melt flow rate (MFR) or melt volume flow rate (MVR) (note: single determination value and many times the average of the cutting material).
2.Tester compact structure, beautiful, the control system can real time measurement and display temperature numerical, has the upper limit temperature protection, constant temperature sound reminders, response time tip etc. Function. The use of advanced PID control technology and high speed and high resolution sampling circuit, make the machine in constant temperature is the following characteristics:
A: heating speed, the dinky overshoot.
B: constant temperature and high precision.
C: in the packing after, can quickly restored constant temperature condition.
Standards: GB/T3682-2000,ISO1133-97, ASTM1238
Characteristics:
1. Fast heating speed, very small overshoot.
2. High precision of constant temperature.
3. Can accelerate recover to constant temperature condition after padding.
4. Can use manual and automatic material trimming test method.5. LCD display, equipment with built-in micro printer, test result can be printed autocratically.
Technical parameters
Machine size(W*H*D) | 250*510*350mm |
Power | AC220V±10% 50/60HZ |
Barrel parameters | Inner hole 9.55±0.025mm |
Pistons parameters | Piston head: 9.475±0.015mm |
Piston length | H=6.35±0.1mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Temperature rangeradius | 400℃ |
Temperature accuracyblade to jawand dust collector | ±0.2 ℃ |
Display resolution | 0.1℃ |
Maximum comsuption | < 600W |
Temperature recovery time | less than 4 min. |
Weight parameters | |
Weight accuracy | ±0.5% |
Basic configuration | 0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 min. |
Material be installed | 1 min |
Material sample temperature recovery time | 4 min. |
When binder set | 1min |
Real imagines:
We have professional packing workers to pack your products!
Packing:
1. Out packing:Standard export wooden case.
2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
Shipping:
You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt ofyour order. It's more preferable for you to provide us with your own FEDEX/DHL account number so that the delivery charge can be charged directly from your account.
ZONHOW has been providing companies with materials testing equipment for over 10 years,addressing the
many quality analysis needs of products. It will perform tests in conduct tensile, compression,bending, shearing,bonding strength, peeling, tearing and other tests. It is suitable for rubber, plastic,leather, metal, nylon line,
fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials.
There are many built-in test procedures to meet most requirement and standards. It is our objective at ZONHOW to provide our customers the best ownership experience by delivering the highest quality products and accessories that offer accurate and reliable test results and time savings.
Our Products
1.Are your company a trading one or a factory ?Factory + trade (integration),10 years focusing on test instruments field,3 years exporting experience.
OEM is also acceptable for us.
2.How to choose the most suitable products?
Our professional team will give you the best suggestion as long as you tell us what kind of test you
need to do and the required specification.
3.What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20
working days after deposit receipt. If you are in urgent need, we can consider making special
arrangement for you.
4.Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines according to
your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
5.Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to
arrange hotel and pick up you from airport.
6.Do you have customers of our country before?
Now our testing machines have been sold to more than 26 countries, like USA, Canada, Russia,UK,
Italy, Germany, European Union, India, Pakistan, Philippines, Singapore, Thailand and Vietnam,Iran,
Brazil and so on.
7.How about your warranty?
Generally, our warranty is one year. Within the warranty period, we can offer technique support and
part parts change, necessarily, our engineers may go to your place for better service.
8.How about the packing for machine, is it safely protected during transportation?
Our machine is packed by standard export wooden box, it won’t be damaged. We’ve delivered many
testing machines abroad by sea or by air without damage.
9.What is the order process?
Inquiry - quotation - communication - order confirming - deposit payment - production - testing and
debugging - balance payment - packing - delivery - customer receiving - after service.
10.How to install and use the product
The product is shipped with an operating instructions and video of English version.
If you want to know more information about us
Please leave a message below and click " send "
Thank you very much for your time and attention!
Contact Us
- Zhonghow Test Equipment Co., Ltd.
- Melt indexer price,melt flow index tester
- Rubber Rheometer Moving Die Rheometer
- Digital izod impact meter, izod pendulum impact test
- Moving die rheometer china ,rubber moving die rheometer price
- Moving die rheometer supplier , price moving die rheometer for rubber
- melt flow index meter , melt flow index test equipment
- Demattia Rubber Flexing Fatigue Test Machine, Demattia Tester
- Demattia Flexing Cracking Tester
- DeMattia Flex Tester for ASTM D813, ASTM D430
- Rubber Flex Cracking Tester, De Mattia Dynamic Fatigua Tester
- Plastic Melt Flow Index Tester price
- Material Charpy Impact Tester/Test Equipment Price
- Rubber demattia flexing-cracking testing machine
- DZ-320 rubber torque equipment mooney viscometer price
- Digital IZOD Impact Strength Tester
- Well designed high quality mdr moving die rheometer
- Most popular price for rubber moving die rheometer
- ZONHOW Digital Display Plastic Melt Flow Index Tester Plastic Melting Point Load Tester
- MFR MVR plastic melt flow index tester price
- ZONHOW melt flow indexer
- Digital De mattia Rubber Flexing Fatigue Testing Machine,Rubber Flex Cracking Tester
- charpy impact test equipment, charpy impact test machine,izod & charpy impact testing machine
- mdr moving die rheometer price,computer servo moving die rubber rheometer
- moving die rheometer tester,rubber testing rheometer machine,rheometer price
Popular Searches
Find Similar Products By Category
- Measurement & Analysis Instruments > Testing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-