Parker F11-010-MB-CV-K-209-000-0 Hydraulic Piston Motors
Parker F11-010-MB-CV-K-209-000-0 hydraulic piston motor
Swash plate axial piston motor is a reversible hydraulic component. The same component can be used as an oil motor, and can be used as an oil pump (which can be directly exchanged with ZBD40 and ZBD75 pumps)
F11 is a bent-axis, fixed displacement motor/pump. It can be used in numerous applications in both open and closed loop circuits.
F11-005 F11-006 F11-010 F11-012 F11-014 F11-019 Parker P11 Motor Pump.
The F11 series is available in sizes 5, 6, 10, 12, 14 and 19 cc.
F11 Features
• Max intermittent pressure up to 420 bar and continuous operating pressure up to 350 bar
• Thanks to low weight pistons and a compact design of the rotating parts, the F11 tolerates very high speeds, up to 14000 rpm
• CETOP, ISO, SAW and SAE versions
General Features
• The laminated piston ring offers important advantages such as unbeatable efficiency and thermal shock resistance
• High allowable speeds and operating pressures means high output power
• The unique piston locking, timing gear and bearing set-up as well as the limited number of parts add up to a very robust design with long service life and, above all, proven reliability.
• The 40° angle between shaft and cylinder barrel allows for a very compact, lightweight motor/ pump.
• Small envelop size and a high power-to-weight ratio
• The motor version has highly engineered valve plates for high speed and low noise
• The pump version has highly engineered valve plates for increased self priming speed and low noise, available with left and right hand rotation.
• The F11's and F12's have a simple and straight-forward design with very few moving parts,making them very reliable motors/pumps.
• Our unique timing gear design synchronizes shaft and cylinder barrel, making the F11/F12 very tolerant to high 'G' forces and torsional vibrations.
• Heavy duty roller bearings permit substantial external axial and radial shaft loads.
Our product range |
Hydraulic pump parts |
||
Hydraulic pump |
Cylinder block |
Press pin |
|
Piston motor |
Piston shoe |
Snap ring |
|
Piston pump |
Retainer plate |
Coil spring |
|
Gear pump |
Ball guide |
Disk spring |
|
Charge pump |
Valve plate |
Barrel washer |
|
Pilot pump |
Shoe plate |
Oil seal |
|
Vane pump |
Bearing plate |
Frication plate |
|
Repair OEM parts |
Swash plate |
Steel plate |
|
Motor spare parts |
Drive shaft |
Metal |
|








Products Name with link
91.8% Response Rate

Products Name with link
91.8% Response Rate

Products Name with link
91.8% Response Rate


Send Inquiry to This Supplier
You May Also Like
-
ORIGINAL SDLG BEARING 28080002151 APPLY FOR SDLG MOTOR GRADER G9180 G9190 G9200US$ 10.39 - 10.95MOQ: 10 Units
-
Factory Direct 3 Ton Excavator Hydraulic Grapple OEM Custom Tine & Jaw Size | 5 Tine Mini Excavator Demolition Grapple Manufacturer, QC TestedUS$ 800 - 1000MOQ: 1 Piece
-
SDLG Seal Kit for Wheel Loader LG918 J4110002988019 Genuine OEMNegotiableMOQ: 1 Piece
-
Genuine Advance Internal Frictional Disc 7502-019 Gearbox PartsNegotiableMOQ: 1 Bag
-
High-Performance GT2263KLNV Turbo Charger for Hino Engineering/commercial VehiclesUS$ 540 - 560MOQ: 1 Unit
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Water Excavator Sensor Replacement for Wiring Service YNF18013NegotiableMOQ: 1 Piece
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces