Factory Samples Making rubber adhesive tape hot melt roller spin coater for sale

Factory samples making rubber adhesive tape hot melt roller spin coater for sale

The Hot Melt Coater is capable of producing coated samples or small production of hot melt adhesives, and then laminating to a variety of foils, films, and papers. Lab scale simulations of production processes can be easily set up and studied.

Continuous coating proofing or small production of laboratory miniature hot melt adhesive coating and laminating machine. The hot-melt pressure sensitive adhesive can be directly coated on the heat-resistant substrate, or coated on the release paper and then applied to different surfaces, such as paper, plastic model metal film, etc. (50 μ m high temperature resistant PET film is recommended for the best experimental substrate).

Features:

1. The whole machine is assembled with high precision modular coating station structure.

2. High Precision PID temperature Control Mode of PT-100 on Rubber Wheel and Rubber Groove

3.  Laminating speed and pressure are controllable

4. Maximum operating temperature 200℃

5. Clean up is easily accomplished through quick, uncomplicated disassembly

6. Generates sample laminates as long as needed

7. Precision ground coating bars

8.  Both coating bars and the back reservoir are heated independently

9. Width of coating can be controlled by teflon insert side dams

10.  Durable aluminum and steel construction means a long machine life with consistent performance

11. Variable speed controller can be adjusted

12. The coating clearance of the upper and lower rubber wheel is precisely fine-tuned to control the coating thickness. The maximum gap of total coating is 500 μ m (base material thickness), and the optimum coating thickness is ≥ 20 μ m (coating accuracy ±5 μ m). After the thickness setting, can lock the rubber wheel indirectly, prevents the clearance change.

13. The maximum width of the coiled material is 200mm (the maximum width of the sheet is 260mm) and the maximum width of coating is 160 mm. The width of the coating is adjusted with two pieces of Teflon baffle in the rubber groove. Can be coated with unlimited length glue, automatic winding.

14. Forward and reverse stepless speed, maximum coating speed: 4.5m/min (optimum coating speed is 1-2m/min) 

16.The coated liner bar can be adjusted to control the roll tension

17.The heating bar, the rubber roller and reservoir can be quickly disassembled separated from the host, it is perfect  to clean adhesive residue. 

Contact Us

Guangdong Liyi Technology Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  Guangdong Liyi Technology Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now