Home > Products > Brushless DC Motor > 24v test dynamometer stator lamination sine wave brushless dc bldc motor control controller drive
24v test dynamometer stator lamination sine wave brushless dc bldc motor control controller drive
- 1000000 Unit / Units per Month
- FOB Ningbo
- T/T Credit Card
- Custom flange 8 poles HFM002 76V 200W 2000RPM 0.96Nm 3.10Amp B3 B14 B34 B5 HALL sensor brushless dc motor
- Custom HFM025 car wheel 1000rpm 48v 750w electric bldc brushless dc asynchronous e rickshaw motor
- HFM054 380v 2200w 1100rpm Heating cooling system bldc brushless dc hvac motor
- EMP007 48V 4.8kw 4000W 2580RPM B3/B14/B34/B5 98.04Amp 14.81Nm controller hall sensor for electromobile
- EMP006 72V 5500W 3680RPM 89.87Amp 14.27Nm B3/B14/B34/B5 Controller brushless BLDC for electromobile
- 110v 1000w 1kw 3000rpm HFM068 hall sensor bldc brushless dc motor
Product Details
Brand Name: | Volcano Electric | Place of Origin: | Zhejiang, China | Model Number: | VOL- IEC112S2250-6P |
Certification: | CCC, CE, ROHS, UL | Torque: | 21.48Nm | ||
Usage: | Boat, Car, Electric Bicycle, Fan, Home Appliance | Construction: | Permanent Magnet | Efficiency: | IE 4 |
Protect Feature: | Waterproof | Continuous Current(A): | 6.42A | Speed(RPM): | 1000rpm |
Commutation: | Brushless |
Product Description
Motor type | Output Power | Voltage | Load | Speed | Rated Torque | Efficiency | Noise | IP Class |
KW | V | A | RPM | Nm | % | dB | ||
VOL- IEC90S2250-2P | 2.25 | 220 ac | 6.42 | 3000 | 7.16 | 92 | 62 | IP 54 |
VOL- IEC100S2250-4P | 2.25 | 220 ac | 6.42 | 1500 | 14.33 | 92 | 62 | IP 54 |
VOL- IEC112S2250-6P | 2.25 | 220 ac | 6.42 | 1000 | 21.48 | 92 | 62 | IP 54 |
VOL- IEC112S3750-2P | 3.75 | 220 ac | 10.70 | 3000 | 11.94 | 92.5 | 62 | IP 54 |
VOL- IEC112S3750-4P | 3.75 | 220 ac | 10.70 | 1500 | 23.88 | 92.5 | 62 | IP 54 |
VIEW MORE PLS CONTACT US >>>
Q:Motor has been running then fails to start,what to do?
A:Likely cause: Fuse or circuit breaker is tripped.
What to do: Replace the fuse or reset the breaker.
Likely cause: Armature is shorted. Motor may make a humming noise and the circuit breaker or fuse will trip.
What to do: Disassemble motor and inspect the armature for a burnt coil. Inspect the commutator for burnt bars. If this condition exists, the motor needs to be replaced.
Likely cause: The brushes may be worn down too far and no longer make contact with the commutator.
What to do: Check the brushes to make sure that they are still making contact with the commutator. Contact manufacturer for brushes.
Likely cause: Controller may be defective.
What to do: Verify voltage is coming out of the controller.
Q: On initial installation, motor fails to start up,what to do?
A: Likely cause: Motor is incorrectly wired
What to do: Verify that the motor is wired correctly.
Likely cause: No output power from controller.
What to do: Measure voltage coming from the controller.
Likely cause: Motor is damaged and the armature is rubbing against the magnets.
What to do: Disassemble motor and see if the armature can be realigned by reassembly. Motor may have to be replaced.
Q: Motor takes too long to accelerate,what to do?
A: Likely cause: Motor controller not properly set.
What to do: Adjust the acceleration trim pot of the controller.
Likely cause: Brushes are worn.
What to do: Verify brush length.
Likely cause: Bearings may be defective.
What to do: Inspect bearings. Noisy or rough bearings should be replaced.
Q: Motor runs in the wrong direction,what to do?
A: Likely cause: Incorrect wiring
What to do: Interchange the two motor leads.
Q: Motor runs OK but has a clicking noise,what to do?
A: Likely cause: Suspect a burr on the commutator.
What to do: Remove burr from commutator using a commutator stone.
Contact Us
- Ningbo Haofeng Magnet Technology Co., Ltd.
Alnico magnet | Brush DC Motor | Brushless DC Motor | Drivers |
Ferrite magnet | High Voltage BLDC Motor | Low Voltage BLDC Motor | Neodymium magnet |
Others | Pot magnet | SmCo magnet | Ungrouped |
- 1850W 24VDC 2100rpm permanent-magnet synchronous motor
- EMP030 48VDC 600W 1800RPM brushless long bldc motor for racing
- EMP008 EV car 2500rpm 48v 1000w 3.82Nm 24.51Amp B3/B14/B34/B5 electric bldc brushless dc synchronous for electromobile
- EMP037 high voltage 3000rpm 220V 750W brushless dc motor BLDC
- High speed 4300rpm 45V 1550W brushless dc motor BLDC
- EMP040 48v 3000w 2650rpm pmsm with high power run a hammer mill
- EMP001 24V 250W 1700RPM 1.40Nm 12.25Amp B3/B14/B34/B5 Brushed brush bl DC motor for sale
- EMP002 hall 24V 1.2kw 1200W 1500RPM 7.64Nm 58.82Amp B3/B14/B34/B5 Brushless DC Motor for desert exploration
- EMP003 24V 3.6KW 3600W 3000RPM 176.47Amp 11.46NM B3/B14/B34/B5 Brushless DC Motor For air compressor
- EMP004 1kw 12V 1000W 1500RPM 6.37Nm 98.04Amp B3/B14/B34/B5 brushless dc BLDC Hall sensor for go-karting
- EMP006 72V 5500W 3680RPM 89.87Amp 14.27Nm B3/B14/B34/B5 Controller brushless BLDC for electromobile
- EMP007 48V 4.8kw 4000W 2580RPM B3/B14/B34/B5 14.81Nm 98.04Amp controller hall sensor for electric vehicle car
- EMP008 48V 1kw 1000W 2500RPM BLDC controller for electric car
- EMP009 24V 750W 3000RPM No controller hall sensor brushless bldc motor for traction drive
- EMP010 48V 3kw 3000W 1500RPM 19.1Nm 73.53Amp B3 B14 B34 B5 hall sensor bldc Brushless DC Motor
- EMP011 24V 3600W 3000RPM 11.46Nm 176.47Amp Controller B5 bldc brushless dc motor for traction drive
- EMP012 48V 2.5kw 2500W 3000RPM 7.96Nm 61.27Amp B3 B14 B34 B5 traction system brushless dc BLDC motor with Hall sensor
- EMP013 72V 4kw 4000W 2580RPM 65.36Amp 14.81Nm eB3 B14 B34 B5 lectro-tricycle BLDC brushless dc motor with controller
- EMP014 12V 600W 1800RPM 58.82Amp 3.18Nm B3 B14 B34 B5 controller BLDC Hall sensor for Oil pump field
- EMP015 24V 1.5kw 1500W 2000RPM 7.16Nm 73.53Amp Hall sensor controller brushless bldc motor with Automotive air conditioning
- EMP023 230Vac 3000W 3000RPM 15.35Amp 9.55Nm B3 B14 B34 B5 temperature sensor brushless bl dc BLDC motor
- EMP024 24V 1500W 3500RPM 73.53Amp 4.09Nm B3 B14 B34 B5 Hall sensor controller brushless bl dc BLDC motor for dirt catcher
- EMP025 24V 1kw 1000W 1500RPM 49.02Amp 6.37Nm Hall Sensor BLDC brushless dc motor for vacuum pump
- EMP021 Customized flange shaft 48V 3kw 3000W 1500RPM 73.53Amp 19.1Nm controller brushless bldc motor for tracking system
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Motor > DC Motor
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-