9315 Test Nozzle With Drainage Function DN008-1/4

Test nozzle with drainage function

Size: DN008-1/4 "

Male Thread on Valve End (1/4 "ISO 7/1 R)

Male Thread at Drain End (1/2 "ISO 228/1)

Meet Russian Gost Standard

PN25 (max. Pressure 25bar at 100 ° C, max. 20bar at 130 ° C)

Working environment:

● Medium (water): -10 ° C to 130 ° C

Below 0 ° C only for aqueous media (with antifreeze)

Above 100 ° C is only suitable for aqueous media (with anti-boiling additive)

Product Highlights:

1. High-grade brass precision forging, the valve parts are compact:

2.Kvsu21m3/h is suitable for any size fan tray camp:

3. Straight water flow will never block the slag:

4. Large water circulation capacity, higher than traditional valve 3 or more

5. The valve is closed tightly and there is no internal leakage.

6. The drive will be powered off automatically after the valve is closed/opened. long lasting:

7. The closed structure is subject to gas intrusion. The motor runs reliably:

8. Can be mounted upright or horizontally

9. The failure rate is extremely low.