Hangzhou Holdwell Mechanical And Electrical Co., Ltd.: 5Yrs; Main products: Fuel Injector, Fuel Pump, Fuel Nozzle, Common Rail Injector

Home > Products > Generator Set Parts > Smartgen Controller HGM180HC

Smartgen Controller HGM180HC

FOB Price

US$ 10 - 20 / Piece

1 Piece(Min. Order)

Port Shanghai or Ningbo
Payment TermsT/T Credit Card

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Brand Name	Smargen		Place of Origin	Zhejiang, China
Model Number	HGM180HC

Packaging Details

Individual Packing or standard export cartons

Product Description

Smartgen controller HGM180HC

Product Description

Description

The Model 180/180hc is an Automatic Engine Control Module. The module is used to automatically start and stop the engine, indicating the operational status and fault conditions, automatically shutting down the engine and indicating the engine failure by LED on the front panel.
HGM180hc append a LCD hours count that base on HGM180.
Operation
If you use hgm180 for the first time , configure is necessary. If you want to configure the module ,please look Configuration. Operation of the module is via a three position key switch mounted on the front panel with OFF(O), STARTand AUTO positions. In the ‘O’ position the output are de-energized.
Manual Operation:
1. Select manual run
2. Depress pre-heat button for required length of time
3. Press START to crank engine
Once the Start button is pressed and maintained, the engine fuel system is energized. The ‘Crank’ output is then energized and the starter motor operated, disengaging automatically when the engine fires or when the ‘Start’ button is released. The protection hold-off timer is then initiated.
Automatic Operation:
1. Select AUTO
2. When Remote Start is active, the generator will automatic start.
Operation of any of the following alarms (which are close on fault) will cause the run output to de-energize:
. Low Oil Pressure
. High Engine Temperature
. Auxiliary Shutdown
. Over speed
This will remove the fuel supply from the engine and bring it to rest. Each alarm has its own LED indicator and once activated no further alarm conditions will be accepted. The alarm output and relevant LED will remain active until the unit is reset by turning the switch to the ‘O’ position.
Over speed Protection
Over speed protection is derived from the generator Hz output. The over frequency circuit monitors the generator Hz output and will shut down the engine immediately if a pre-set frequency level is exceeded. This trip level is selected by a switch for either 50Hz or 60Hz nominal operation (57Hz or 68Hz trip respectively).
During engine cranking and for a short time afterwards the protection hold-off timer (10 seconds) is active and the relevant alarm inputs are inhibited. This enables the engine to start and achieve normal running conditions. Once the timer has expired the inputs are enabled providing normal protection from the module.
Charge Failure warning
Charge Failure warning is also provided by monitoring the WL terminal on the charge alternator. This operates on a similar principal to the warning lamp fitted in a motor vehicle, should the output fail the charge fail LED will illuminate. The module will also provide the alternator excitation current via this connection.
Specification
DC Supply: 8 to 35 V Continuous.
Alternator Input Range: 15 - 306VAC(+20%) RMS
Alternator Input Frequency: 50 - 60 Hz at rated engine speed.
Over speed: nominal frequency +14% (+24% Overshoot)
Start Output: Solid State 1A positive B+ terminal
Fuel Output: Solid State 1A positive B+ terminal

Packaging & Shipping

Company Information

Focus on Truck and generator Parts Solution

With an aim of ensuring maximum efficiency and quality of Holdwell products and service,we build global cooperation with our partners and constantly develop and promote innovation on both sides.

Our total quality management in purchasing is based on the transfer of purchasing requirements of our customers to suppliers.We carefully follow the requirements of standard TS16949 and the European Business Excellence Model(EFQM.)

FAQ

1. Q: Are you a factory or trading company?

A: We are a trading company with factory.

2. Q: Where is your company located? How can I visit there?

A: Our company is located in Hangzhou, Zhejiang, China, near Shanghai. You are warmly welcomed to visit us!

3. Q: How can I get some samples?

A: Please connect me for samples, and my phone number: +86 18768106189

4. Q: Can the price be cheaper?

A: Of course, you will be offered a good discount for big amount.

Our Services

Payment Terms

T/T, Western Union,Paypal are the payment methods we accept at present.
Shipping
The delivery time is about 2-3 workdays. It takes about 3-15 days to worldwide, Please note us your contact details include your phone number for easy contacting from shipping company officer.
Feedback
1. Customer satisfaction is completely guaranteed. If for any reason you are unsatisfied with your order, please contact us first before you leave the feedback.
2. We will do our best to take care of you and if you have any questions please do not hesitate and feel free to contact us at:

Company Profile

Hangzhou Holdwell Mechanical And Electrical Co., Ltd.

To improve our service, we offer products at reasonable price and good quality.

Contact Us

Hangzhou Holdwell Mechanical And Electrical Co., Ltd.

*Email
Please enter Your valid email address.
*To

Hangzhou Holdwell Mechanical And Electrical Co., Ltd.
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

Aerial Work Platform Parts	Agriculture Machinery Parts	Construction Machinery Parts	Diesel Engine Parts
Generator Set Parts	Others	Refrigeration transport parts	Ungrouped

Smartgen Controller HGM180HC

You May Like

Product Details

Product Description

Company Profile

Contact Us

Product Categories

New Products

Popular Searches

Find Similar Products By Category