Contact Platform Support
Help CenterT8431C Analogue Input P8431
Related Products
-
T8461C Digital Output Module P8461US$ 1000 - 10000MOQ: 1 Piece -
T8310C Expander Processor P8310US$ 1000 - 10000MOQ: 1 Piece
-
T8311C Expander Interface P8311US$ 1000 - 10000MOQ: 1 Piece
-
T8800C Digital Input FTA P8800US$ 1000 - 10000MOQ: 1 Piece
-
T8830C Analogue Input FTA P8830US$ 1000 - 10000MOQ: 1 Piece
T8431, T8431C, P8431
T8431 Analogue input module
Description
The Trusted TMR analogue input module interfaces to 40 single-ended field input devices. A wide input range and programmable thresholds allow the module to be used in most voltage or current configurations. Comprehensive diagnostic tests are performed on each input channel, including tests for out of range values and stuck at failures. Fault tolerance is achieved through Triple Modular Redundancy (TMR) within the same module for each of the 40 input channels.
The module can apply a digital filter to each input channel. Individual channels can be configured for high noise immunity (50Hz or 60Hz rejection), low noise immunity (fast response) or pass-through operation (no filtering).
Each input channel has four configurable state thresholds, which may be assigned to SOE reporting. A change of state triggers an SOE entry. The on-board sequence of events (SOE) reporting has a resolution of 1ms.
Each triplicated section of the module, referred to as a slice, conditions and measures each channel independently. Each slice is optically isolated up to 2500V dc. Each slice sends its data to a safety layer hardware voter that presents the information from all three slices to the Trusted TMR processor. When a fault is detected on a slice of the module, the Trusted TMR processor will flag the error, indicating the need to replace the module. The Trusted TMR processor will continue to use the information provided by the remaining two slices until a replacement module is available. Replacement modules can be located in a standby slot next to the module or in a designated SmartSlot with a temporary connection to the same Trusted termination assembly.
Modules may be placed in any I/O module slot in a Trusted processor chassis or expander chassis. Once the I/O module configuration is set, mechanical keying is available on all I/O modules to prevent inserting a module into an incorrect slot.
Configuration of the module is carried out using the Trusted Toolset running on an engineering workstation. Once configured and loaded into the Trusted controller, replacement modules are online educated by the TMR processor.
Features
40 TMR input channels per module.
Comprehensive diagnostics and self-test.
2500V dc optically isolation.
Digital signal filtering on a per channel basis.
Four user configurable thresholds per channel.
On-board 1ms resolution sequence of events reporting.
Hot replaceable.
Front panel status LEDs for each channel.
Module fault and status indicators.
IEC 61508, SIL 3 safety applications.
Send Inquiry to This Supplier
You May Also Like
-
T8850C Analogue or Digital Output FTA P8850US$ 1000 - 10000MOQ: 1 Piece
-
T8842 Universal Versatile FTAUS$ 1000 - 10000MOQ: 1 Piece
-
T8123C Interface Adaptor P8123US$ 1000 - 10000MOQ: 1 Piece
-
T8480C Analogue Output P8480US$ 1000 - 10000MOQ: 1 Piece
-
T8270C Fan P8270US$ 1000 - 10000MOQ: 1 Piece
-
T8153C Interface Adapter P8153US$ 1000 - 10000MOQ: 1 Piece
-
T8231C Power Pack P8231US$ 1000 - 10000MOQ: 1 Piece
-
T8312-4C Interface Adaptor P8312-4US$ 1000 - 10000MOQ: 1 Piece
-
T8100C Controller Chassis P8100US$ 1000 - 10000MOQ: 1 Piece
-
T8300C Expander Chassis P8300US$ 1000 - 10000MOQ: 1 Piece
