CRS-200C bosch diesel injector tester

CRS-200C bosch diesel injector tester 

                                                                   ------Flow is measured by flow sensor

CRS-200C test bench is used to test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO,as well as Piezo injector.  It simulates the injection principle of common rail motor completely and the main drive adopts the most advanced speed change by frequency change. High output torque, ultra low noise, rail pressure stable. Oil pump speed, injection pulse width, oil measurement and rail pressure are all controlled by industrial computer by real time. The data is also obtained by computer. 19 inch LCD screen display makes the data more clear. It adopts drive singal modulation and forced-cooling system, advanced technology, steady performance, precise measurement and convenient operation.           

>>>CHARACTERISTIC

1. Main drive adopts the speed change by frequency change.

2. Windows operating system. 19''  LCD screen display.

3. Oil quantity is measured by sensor, compare the test data automatically.

4. Drive signal modulation.

5. Rail pressure can be tested in real time and controlled automatically, it contains             the high-pressure protection function.

6. Pulse width of the injector drive signal can be adjusted.

7. It is installed with forced-cooling system.

8. More than 600 kinds of data can be searched, saved.

9. Protection function of short-circuit.

10. Plexiglass protective door, easy operation, safe protection.

 >>>FUNCTION

1.Test injector brands:BOSCH, SIEMENS, DELPHI, DENSO.

2. Test 4 pieces of injector at a time.

3. Test the seal performance of common rail injector.

4. Test the pre-injection oil quantity of common rail injector.

5. Test the max. oil quantity of common rail injector.

6. Test the min. oil quantity of common rail injector.

7. Test the average oil quantity of common rail injector.

8. Test the backflow oil quantity of common rail  injector.

9. Clean and repair the problem(caused by pollution) of injector.

>>>TECHNICAL  PARAMETER

1. Fuel temperature: 40±2℃

2. Rail pressure: 0~1800 bar

3. Test oil filtered precision: 5μ

4. Input power: 380V/50HZ/3phase or 220V/60HZ/3phase

5. Rotation speed: 0~2000RPM

6. Oil tank capacity: 20L

7. Overall dimension(MM): 1180×770×1510

8. Weight: 300KG

we can accept T/T, western union, moneygram, L/C.

Jessie

Taian Common Rail Industry & Trading CO., LTD

Skype: taiancommonrail

QQ: 1847056723

Tel: 0086-538-6527066

Mobile/Wechat/WhatsApp: +86 15092855661