Automatic feed pressure riveting machine automatic packing column nuts, nut, screw pressure riveting machine yipeng YY8-500 - c hydraulic pressure riveting machine

Parameters that

The power supply voltage:Ac 380 v

Power:2.2 kw

Pressure range of output:0 to 8 tons infinitely adjustable

Total trip:110 mm (including power trip)

High throat:380 mm

Deep throat:500 mm

The fastest frequency of use:1 time / 1 second

Overall dimensions of equipment:(long) 840 mm * 1100 mm (wide) * 2020 mm (high)

The weight of equipment:600 kg

The holding time 0 to 5 s

Repeat accuracy + / - 1%

Upper die down speed is 60 mm/s

Model description: YY - hydraulic drive (economy, high efficiency, energy saving, environmental protection)

                                 8 - output pressure (tons)

                             500 - deep throat (MM)

                                 C - C type cast steel frame (frame 45 # integral cast steel forming, the whole processing molding)

Automatically send nut pressure riveting equipment characteristics:

1, feeding a variety of ways: upper die feed, lower die feed;

2, reliable way of feeding, with mechanical feeding is given priority to, complementary with pneumatic equipment, reduce the intermediate links, more efficient, more reliable;

3, feeding species is well-found, the various specifications nut has a corresponding fast automatic feeding system;

Matching function configuration:

1, the optional tool to protect system and positive limit oil cylinder. Positive limit is specially designed for soft base material, such as PC board, plastic, glass and aluminum, it makes the fastener when the pressure plate will not be pressure deformation or crushed.

2, optional PEM modular automatic feeding system, provide 3 times the efficiency of manual feeding pressure riveting, lets you in not under the condition of the automatic feeding tray automatically, import, transportation nut, screw and nut column. And can be used to mold HuanXing high speed conveniently and 2 minutes to complete the nut, screw and nut column replacement, to provide as many as 2000 pieces of fastener feed/hour delivery speed.

3, optional leakproof riveting counting system, for each product riveting screw number after processing complete in every product to carry on the prompt, if the product of the number of riveting is not consistent with the number of the riveting, leakproof module will stop the machine and prompt operation personnel, at the same time with the number of total batch processing products. With manual reset and automatic reset can choose two kinds of mode.

4 optional feeding equipment of different specification, automatically send nail tools according to customer's requirements (screw, screw length must be greater than the tail size 1.5 times)

5, optional auxiliary work surface, with the sheet without bending or large workpiece processing, reduce the operating personnel work load, improve work efficiency.

6, optional laser light positioning and allow the operator to quickly on the upper and lower mould, artifacts, riveting screw anchor point, effectively improve the work efficiency.

USES:

Products are widely used in sheet metal industry, metal and other industries. Applies to a variety of fasteners and panel connection (purchase often-expensive screw, not to take off the screw, panel screws, pressure riveting nut, blind hole nut column, up riveting nut), and a rivet connection, etc.