Contact Platform Support
Help CenterYN27A Internal Combustion Rock Drill/rock Drill Equipment
Related Products
-
YN27P Internal Combustion Crushing Pick/ Internal Combustion Broken PickUS$ 2500 - 2600MOQ: 1 Set -
YN27C Internal Combustion Rock Drill/ Manual Drill EquipmentUS$ 500 - 600MOQ: 1 Set
-
YN27A Internal Combustion Rock Drill/hand Held Rock Drill EquipmentUS$ 2500 - 2600MOQ: 1 Set
-
YN27P Internal Combustion Crushing Pick/ Portable Gasoline Rock BreakerUS$ 2500 - 2600MOQ: 1 Set
-
YN27C Internal Combustion Rock Drill/Rock BreakerUS$ 500 - 600MOQ: 1 Set
YN27A Internal Combustion Rock Drill
1. Introduction of YN27A internal combustion rock drill
The YN27A internal combustion rock drill is widely used in an internal combustion type rock drill for mining, road construction, quarrying, national defense engineering, etc. The rock drill is easy to operate. The rock drill is suitable for areas with no power supply and no wind pressure equipment and temporary engineering with large fluidity. Especially suitable
2. Features of YN27A internal combustion rock drill
· It is not necessary to replace the internal parts of the machine head, just move the handle as required to operate.
· The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency.
· The machine has reached the first-class level of similar products and can be completely interchanged with international similar products.
· Drill holes in the rock, which can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters.
· The weight of the main unit is only 27 kg, which is convenient to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large fluidity.
· This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°.
3.Parameters of YN27A internal combustion rock drill
· Host weight: 27kg
· Engine type: Single cylinder air-cooled two-stroke gasoline engine
· Carburetor type: No float
· Ignition method: Thyristor contactless system
· Engine capacity:185 cm³
· Engine load speed:(Determined when chiseling five holes）：≥2450 r/min
· Drill rod idle speed：≥200r/min
· Shank size tail：Hexagon 22|*108 mm
· Deepest hole penetration depth：≥6 m
· Fuel tank capacity：≥1.14 L
· Punching speed：≥250mm/min
· Gasoline and lubricating oil mixing ratio:(By volume）：9:1
· Spark plug electrode gap:0.5-0.7 mm
· Fuel consumption rate:(Determined when chiseling five holes):≤0.12L/M
· Impact energy:≥20J
Shandong Master Machinery Group specializes in supplying internal combustion rock drill. The main models are YN27A, YN27P, YN27C.
Send Inquiry to This Supplier
You May Also Like
-
Hand-held Internal Combustion Rock Drills/YN27P Internal Combustion Crushing Pick/Construction Road Breaking PickUS$ 2500 - 2600MOQ: 1 Set
-
ZDY-650 Full Hydraulic Tunnel Drilling Rig/hydraulic Turnel Drill MachineUS$ 10300 - 10600MOQ: 1 Set
-
ZDY-750 Full Hydraulic Tunnel Drilling Rig/All Hydraulic Drill RigsUS$ 3400 - 3600MOQ: 1 Set
-
ZDY-1250 Full Hydraulic Tunnel Drilling Rig/full Hydraulic Tunnel RigUS$ 3400 - 3600MOQ: 1 Set
-
ZDY-2300 Full Hydraulic Tunnel Drilling Rig/mine Coal Hydraulic Drill MachineUS$ 7900 - 8000MOQ: 1 Set
-
ZDY-1200S Full Hydraulic Tunnel Drilling Rig/full Hydraulic Tunnel RigUS$ 3400 - 3600MOQ: 1 Set
-
ZDY-1600S Full Hydraulic Runnel Drilling Rig/All Hydraulic Drill RigsUS$ 3000 - 3500MOQ: 1 Set
-
ZDY-1900S Full Hydraulic Tunnel Drilling Rig/full Hydraulic Turnel Drill RigUS$ 3300 - 3600MOQ: 1 Set
-
ZDY-3200S Full Hydraulic Tunnel Drilling Rig/All Hydraulic Drill RigsUS$ 2000 - 2200MOQ: 1 Set
-
ZDY-4000S Full Hydraulic Runnel Drilling Rig/full Hydraulic Tunnel RigUS$ 2000 - 3000MOQ: 1 Set
