reflector led 200w AC Linear 85-265V reflectores leds

reflector led 200w AC Linear 85-265V reflectores leds

Knowledge about housing material 

Radiator for LED flood lighting: 1070 aluminum>6063 aluminum>aluminum-magnesium alloy>ADC die-cast aluminum>iron>plastic

Light source for LED flood lighting: Osram, Philips, Nichia, Samsung (manufacturers of international brand LED chips)>Hongli, Sanan (copper bracket, pure gold wire, imported glue and phosphor)>Other brand LED chips packaging factory (aluminum Bracket, alloy wire, ordinary glue and phosphor)

Driver for LED flood lighting: MEAN WELL, MOSO, Infinova, Sosen (well-known brand LED driver manufacturer)> Bipolar non-flicker (standard CE, TUV certification)> High PF with stroboscopic (standard CE, TUV certification)> High PF non-isolated with strobe (standard CE, TUV certification)>High PF isolated LED driver>High PF non-isolated LED driver>Low PF isolated LED driver>Low PF non-isolated LED driver>Linear power supply (DOB: Driver-On-Board)

Description:

This flood light is best suitable for outdoor applications such as landscape, gardens, parks, walk
ways, construction sites, car parks, advertising boards etc.
Its die cast aluminum body is durable and water resistant. IP65 enclosure ensures the protection
from water and dust. The mounting bracket is suitable for mounting on the wall and the ceiling with
180deg tilt. It can be faced downward or upward.
The LED driver used inside this flood light is isolated driver which acts as an electrical isolation
between main supply and the LED circuit. The driver enclosure is also IP65

Advantage:

♦ Whole Set Die-Casting Aluminum Shell, Use Thick Material
♦ High Purity Aluminum Making a good heat dissipation performance
♦ Toughened glass cover to protect the lamp body is not fragile
♦ The buckle design makes the cover easier to stick to the lamp body, Resulting in a better
waterproofing effect
♦ There are four drain holes in the lamp body surface, The water covered on surface can easily drain
♦ Internal outer ring with dual water tank design, Built-in double silicone waterproof apron, The
maximum limit to prevent rain into the lamp body
♦ SMD light source to achieve the greatest degree of brightness increase, At the same time once the
water vapor, into the lamp body can play a secondary protection
♦ SMD heat dissipation will be better than COB
♦ We are using a 3-year warranty of the CE certified waterproof power supply IP67
♦ All power supplies are 100% aging tested using the machine
♦ All the lights are lit 48 hours aging, at the same time we will make waterproof aging test

Specification sheet

Installation

Application:

Floodlights are widely used in shopping malls, hotels, gardens and other architectural lighting at
the same time also used for road cinemas, billboards, trees and other decorative lighting