Long strong fiberglass telescopic pole,12m frp telescopic pole , fiberglass extended pole

         These are extremely strong poles, with a much greater wall thickness (up to 2mm!) than the usual "fishing rod" types.A special reinforcing winding technique - several layers of fiberglass are wound in alternating direction (criss/cross winding) -    provides greatly increased lateral and linear strength. Stronger joints are achieved by a much larger overlap between the individual tube segments than usual. 
          They can also easily support temporary lightweight 1 Element Quad or Delta loops for 20-10m, and dipoles for all bands,especially when used with open wire feedline. (Most baluns would be somewhat heavy). 4-6 poles could be used to build lightweight beams for 40 or 80m.  Even the top segment is 8mm in diameter (and 1.4mm wall thickness), so the poles can be used to their full 12m length - unlike other poles where the top segment is very thin as a whip. The best (and cheapest) wire to use for building such wire  antennas (verticals, loops, dipoles etc.) is AWG 18 (= 1mm diameter) enameled copper wire or similar. Thin fishing monofilament (1mm diameter) or similar rope is very suitable for guy lines.

        Feaure for Long strong fiberglass telescopic pole,12m frp telescopic pole,fiberglass extened pole

• A single person can easily put them up within a few minutes.
• Especially developed to make our portable equipment even more rugged and durable!
• These are extremely strong poles, with a much greater wall thickness (up to 2mm!) than the usual "fishing rod" types.
• A special reinforcing winding technique -several layers of fiberglass are wound in alternating direction (criss/cross winding)provides greatly increased lateral and linear strength.
• Stronger joints are achieved by a much larger overlap between the individual tube segments than usual. 
• They can also easily support temporary lightweight 1 Element Quad or Delta loops for 20-10m, and dipoles for all bands,
• Especially when used with open wire feedline. (Most baluns would be somewhat heavy). 4-6 poles could be used to build lightweight beams for 40 or 80m. 
• Even the top segment is 8mm in diameter (and 1.4mm wall thickness), so the poles can be used to their full length,unlike other poles where the top segment is very thin as a whip.
• The best (and cheapest) wire to use for building such wire antennas (verticals, loops, dipoles etc.) is AWG 18(= 1mm diameter) enameled copper wire or similar.Thin fishing monofilament (1mm diameter) or similar rope is very suitable for guy lines.
• 1-23m fiberglass telescopic mast,fiberglass frp telescopic pipe,carbon fiber telescopic tube  7m 8m 10m 12m 18m

       Information on Long strong fiberglass telescopic pole,12m frp telescopic pole,fiberglass extened pole

       1. fiberglass telescopic poles extended up to 12m

       2.. wall thickness up to 2mm 
       3 .criss/cross winding
       4..stronger joints of overlap 
       5. for all kinds of wire antennas
       6. light weighted, one person can easily put them up

       7. UV protected

 Specification for Long strong fiberglass telescopic pole,12m frp

 elescopic pole,fiberglass extened pole

 Other specification for choose

A: Straight type telescopic poles with clamps 

The figures are ordered as OD*ID*Length (Unit: mm)

clamps design

B : Conical telescopic poles ---fishing-rod design

The figures are ordered as ODsmall*IDsmall*ODlarge*IDlarge (Unit: mm) 

ODsmall*OD large for each first section which is solid rod 

C:Special design for fiberglass telescopic poles

Design 1:------------15m pole  

Design 2:------------18m  pole 

Some popular designs