small frp industrial cooling water tower with CE certificate closed type

1.Working fluid (water, oil o other liquid) flowing inside of the coils, which is enwrapped by spray water on the outside. The heat of water is transferred by coil and become the saturated vapor when meet the water and air.

2.The heat is exhausted out of the tower by the tower by the top fan; water is collected back to the bottom tank and circulates continuously. The spray water is cooled down via PVC radiation fin in the process of circulation, and flow is the same direction with the fresh wind. The coil mainly takes sensible heat travel style.

3.The most benefit of this style is can avoid scale formation on the outside of the coil. And this will apply especially to dealing with high temperature fluid (e.g. 60°C) or the fluid need big temperature difference (e.g. 60°C to 35°C).

No Rust

YBF series cooling tower with plate galss steel will not corrosion easiliy and the board can be long-term used

Low Noise

Various configuration of YBF meets different noise requirements. The maximal noise at from the plate is very low

Energy Conservation

Howllow aluminum alloy fan, with high strength, light weight, easy balance, largw wind volume, make it easily drived by the power of a small motor. It's more energy-saving than others.

Cost-effective

Your Best Choice

Suzhou Aubert Machinery Co., Ltd is the branch of HIGH REAT Environmental protection equipment (Suzhou) CO., LTD.The company is with the professional R & D teams, owning many years of industry experience, and with the technical supporting of the German company TLETEC, as well as the highly specialized engineering design and construction team.

 Contact and Service

Telephone:    0512-68852939
Fax:                  0512-68851763
E-mail:             tinawuxc @vip.163.com
                           kathy @szaubert.com
Address:         Room510,   No.118 Changxu Road, Suzhou,                                   Jiangsu, China