Stainless steel force transfer joint standard flange

Stainless steel power transmission joint series products belong to metal manufactured products, which have high tensile and compressive strength, soft sealing performance is superior, easy to assemble and disassemble and other functions, often used in power, the following is the stainless steel power transmission joint in the installation of what construction principles:

1, the stainless steel power transmission joint should be completed before the installation of the relevant procedures, such as testing, heat treatment, pressure test, cleaning, degreasing, internal corrosion and lining, etc., has been completed, and meet the requirements.

2. The civil engineering related to the stainless steel power transmission joint has been completed and passed the joint inspection by the relevant personnel of the civil engineering and installation unit. During the inspection, the pipe support foundation, pipe bridge, pipe pier, pipe trench, cushion, valve well, as well as embedded parts, reserved holes and waterproof shoulder used in the pipeline shall be checked according to the drawings, and must meet the design requirements and installation requirements. The civil and installation parties shall countersign each other for approval;3. The inside of pipes, sections, fittings and valves is reasonably clean without dirt or sundries;

4. The pipes, stainless steel power transmission joints, valves and gaskets have been checked according to the design requirements, and their materials, specifications and models are correct; Pipeline prefabrication quality meets the requirements;

5. Check the position and quantity of the guard plates used for installing or welding pipe supports and hangers on the equipment to meet the installation requirements of stainless steel power transmission joint pipes.

6. The equipment connected with the stainless steel force transfer joint is found to be qualified, fixed, and the secondary grouting meets the requirements, and the notice of permitted piping is obtained.

7, with the inner sleeve of the stainless steel force transfer joint should pay attention to the inner sleeve bobbin direction and the direction of medium flow, hinge type telescopic hinge rotation plane should be consistent with the displacement rotation plane.