High market share peanut sheller with high quality

High market share peanut sheller with high quality

Technical parameter of the machine:

Model:TZPS-500

Weight:150kg

Dimension:900*650*1350mm

Capacity:300-500kg/h

Shelling rate:≥98%

Voltage:220v

Power:2.2kw

Feature of the machine:

1.Shelling roll use wooden wheel dry-peeling,electric sieve classification& selection.

2.Shelling roll is made of high quality imported timber, seed damage rate is extremely low, the outer is beautiful generous ,strong and durable because of iron powder spraying craft .

3.The motor made of new copper wire with longer service life.

4.Due to special blower with careful design,measurable grace,uniform distribution of wind, peanut sheller can separate the seeds and the shell effectively,improve seed recovery optimization.

5.Shelling configuration with high quality wheel,adopting unique design,it is easy to move.

6.The machine is small, high efficient and convenient.

7. Each machine is equipped with three grate, different size specifications applicable peanut sheller

Cautions of peanut sheller:

1. Keep Sheller placed spacious flat space operations.

2, depending on the choice of shelled peanuts size sieve matching peel.

3, when the machine is running, do not reach into the motor, hair dryer, the inside of the cover and the inlet at the depths of other mechanical moving parts, so as not to cause injury.

4, the inlet width adjustment is generally about 3.5 cm (can make the appropriate adjustments, depending on the size of peanut varieties), peanut sheller when required to maintain a uniform feed.

5, when assembled vibration sieve, vibrating screen at the bottom of the rod nut to be tightened, the rod is generally reserved 2 cm length of the tail can be.

6, if the shelled peanuts is too dry, peel the breakage rate will increase accordingly, place a few hours after this time can be uniformly wet with water then peel peanut shell, you can achieve the desired effect.

Picture of  peanut sheller