Almond Shell Separating Machine Electric Pecan Sheller

Wooden packing

operating

1. First check if the connection and transmission parts are loose and there are no abnormalities.

2. Check the power supply and the wire head is in good contact.

3. The gap of the stator and rotor has been adjusted before leaving the factory, and the size of the gap can be adjusted according to the size and shape of the walnut.

Gap adjustment:

For small models, two nuts on the top of the intermediate shaft are locked to each other, loosen and twist the shaft nut, and the upward adjustment gap becomes larger, so that the large crack is formed, the downward adjustment gap becomes smaller, and the small crack is made, and then the adjustment is good. Lock and secure the two nuts.

For large models, adjust the speed, the faster the speed, the smaller the crack, the slower the speed, the larger the crack.

Product Details

Walnut shelling machine product performance characteristics:

1. This product is a new generation of hard walnut shelling machine jointly developed.

2, light weight (200KG), small size, easy to transport, simple operation, flexible use, high processing efficiency.

3. The removal rate of walnut shell of this equipment is higher than 99%, and the damage rate of walnut shell is less than 5%.

4, suitable for small processing enterprises and daily processing of walnuts in the 4--5 tons of walnut processing business operators.

5, the machine uses 220V lighting, (or 380V power) power 1.5KW or 3KW, energy saving.

6. The machine has low failure rate, long service life and convenient maintenance.

7, the machine cost-effective, saving manpower and material resources, two people can operate, can process about 60-90 tons per month.

8, debugging is simple, a variety of walnut shelling enterprises or walnut processing plant users, you can adjust.

Scope of application: different sizes of walnuts and macadamia

Structure: The walnut sheller consists of a frame, a fan, a rotor, a single-phase motor, a screen (two sizes), a hopper, a vibrating screen, a rotating gear, and a chain.

Walnut shelling machine works:

The sheller consists of a stator and a rotor. During operation, the walnut is ground and broken as it passes through the pores between the stator and the rotor.

Before peeling, the walnuts need to be graded, because when the walnut is peeling, the gap between the stator and the rotor is adjusted according to the size of the walnut. When the sheller is working, we should first adjust the gap between the stator and the rotor according to the size of the walnut, and then put a small amount of walnut test first, and then mass production.