Area Sensor also Safety Light Curtain for Finger Hand Body Protection 35mm Thin NPN PNP Relay

Sensing object

Φ15mm or more opaque object(<15mm sensing object can also be customized)

Supply voltage

12 to 24V DC ±10% Ripple p-p 10% or less

Sensing mode

Through beam

Synchronous mode

Optical Signal Synchronous or Cable Line Synchronous

Output

NPN open-collector transistor, Max. Load current:100mA; Voltage Drop: <1.5V

PNP open-collector transistor, Max. load current:100mA; Voltage Drop: <1.5V

Relay SPDT, 5A/250VAC, 5A/30VDC

Output operation

ON when all beams are received, OFF when one or more beams are interrupted.

Short-circuit protection

Built-in

Response time

10ms or less

Indicator

Emitter: Power indicator: green LEDx2

(light up when the power is ON; If emitter is off that is indicated by the number of LEDs lighting up)

Receiver: Operation indicator: Red LED

(lights up when one or more beams are interrupted), Stable indicator: Green LED(lights up when all beams are stable received)

Protection

IP66

Interference prevention function

Incorporated

Ambient temperature

-15°C ... +65°C

Ambient humidity

35 to 85% RH

Ambient illuminance

Sunlight: 10,000L x at the light -receiving face, Incandescent light: 3,000 x at the light-receiving face

EMC immunity

RFI>10V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)

Voltage withstand ability

1,000 V AC for one min. between all supply terminals connected together and enclosure

Insulation resistance

>100 MΩ

Vibration resistance

10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each

Shock resistance

490m/s2, acceleration(50G approx) in X, Y and Z directions for three times each

Emitting

Infrared LED

Material

Aluminum Enclosure, Polyester lens

Connection

2m PVC Cable / M12 Connector