Contact Platform Support
Help CenterChina Manufacturer Raw Material Liquid Silicone Rubber for Climbing Holds Molding
Related Products
-
China Manufacturer Raw Material Liquid Silicone Rubber for Climbing Holds MoldingUS$ 1 - 100MOQ: 200 Kilograms -
Factory Price Rtv2 Silicone Rubber for Crafts MoldingUS$ 1 - 100MOQ: 200 Kilograms
-
Factory Price Rtv2 Silicone Rubber for Crafts MoldingUS$ 1 - 100MOQ: 200 Kilograms
-
High Quality Rtv Molding Silicone Rubber for Furniture Mold MakingUS$ 1 - 100MOQ: 200 Kilograms
-
High Quality Rtv Molding Silicone Rubber for Furniture Mold MakingUS$ 1 - 100MOQ: 200 Kilograms
China Manufacturer raw material liquid silicone rubber for climbing holds molding
Climbing Holds Molding Silicone
1.Description
GC RTV silicone C-820/C-825 are good for climbing holds molding. They are widely used for rock climbing holds, climbing walls, climbing holds etc.
2. Technical Datasheet
Typical general characteristics | Inspection Method | Value | |
Product data (Catalyzed A+B) | C-820 | C-825 | |
Hardness | Shore A | 20±2 | 25±2 |
Mix Ratio | A:B | 100:3 | 100:3 |
Color | / | White | White |
Pot life | 25 °C (77F) | 30-40mins | 30-40mins |
Curing time | 25 °C (77F) | 3-4 hours | 3-4 hours |
Mixed viscosity | mPa.s | 16000±1000 | 20000±1000 |
Tear-strength | kg/cm | 20±2 | 22±2 |
Tensile-strength | M.pa | 3.6±0.5 | 4.0±0.5 |
Elongation | % | 400±50 | 450±50 |
Shrinkage | % | ≤0.3 | ≤0.3 |
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
Guochuang Silicone manufacture and produce custom rtc-2 silicone, addition cure silicone rubber, silicone for mold making. Our platinum cure silicone rubber, liquid silicone rubber for sale.
3. FEATURES
Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties,Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate
4.Appearance
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.
5.SHELF LIFE:
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
6.Package
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
Send Inquiry to This Supplier
You May Also Like
-
China Manufacturer Mold Making Liquid Silicone Rubber for Grc Gfrc MouldingUS$ 1 - 100MOQ: 200 Kilograms
-
China Manufacturer Mold Making Liquid Silicone Rubber for Grc Gfrc MouldingUS$ 1 - 100MOQ: 200 Kilograms
-
Cheap Liquid Silicone Rubber to Make Molds for Lost Was CastingUS$ 1 - 100MOQ: 200 Kilograms
-
Cheap Liquid Silicone Rubber to Make Molds for Lost Was CastingUS$ 1 - 100MOQ: 200 Kilograms
-
Cheap Price Two Component Silicone Rubber Liquid for Model MakingUS$ 1 - 100MOQ: 200 Kilograms
-
Cheap Price Two Component Silicone Rubber Liquid for Model MakingUS$ 10 - 100MOQ: 200 Kilograms
-
Where to Buy Silicone Rubber Molding Material for Shoe Sole MouldUS$ 1 - 100MOQ: 200 Kilograms
-
Where to Buy Silicone Rubber Molding Material for Shoe Sole MouldUS$ 1 - 100MOQ: 200 Kilograms
-
Low Price Rtv-2 Silicone Rubber With Hardener for Candle Soap Mould MakingUS$ 1 - 100MOQ: 200 Kilograms
-
Low Price Rtv-2 Silicone Rubber With Hardener for Candle Soap Mould MakingUS$ 1 - 100MOQ: 200 Kilograms
