battery powered rebar tying machine from China market

portable automatic rebar tying machine from China market

automatic rebar tying machine, Rebar tying machine, Rebar tier manual rebar tying tool,a hand held electrical tool,can tie rebar quickly and automaticaly.Powered by rechargeable battery it can be used alternatively and continuously.Tying can be completed by putting the jaw on the crossed rebars and pulling the trigger only.It saves labor and highly imporves working efficiency.it is easy and simple to operate,convenient and light to carry.it is widely used in European countries and the United States and welcomed by the construction.

 Advantages:

1,Perfect tying:With appropriate using of the machine, tying knot is perfect,and all the ties are firm

2,Adaptability:the same machine used to work with different diameters of bars,stirrups,hangers,etc.

3,Easy of use:In just a few days the less experienced learner becomes an accomplished  

   professionals of your work.

4,Effortless:The operator is able to work all day without fatigue

5,No risk:Low voltage of battery without risk of electricity

Features:

1.Max. Tying Knots: more than 3000 knots on a single charge

2.Typing time: 0.8second/knot

3.The number of the knot can be select to be 2 turns or 3 turns

4.Packing precast concrete products

5.Precast steel or mental tubing packing in architecture engineering scen

6.Rebar tying machine Widely used in construction industry

7.Rebar tying machine (WL-210&WL-400 ) conforms to 89/336/EEC Electromagnetism Compatible,    73/23/EEC Low Voltage and 98/37/EC Machinery Requirement of ECC Instruction.

8.Rebar tying machine (WL-210/WL-400) is hand-held machine used to pack rebars quickly.

9.Automatic rebar tying machine by iwiss made is a miniature motor tool possesses the trait of safety  and credibility

Main Parameter

Battery Type:

9.6V  Ni-MH   3000mAh

Charge time : 1 hour

Charger: 110-240V   50/60Hz

Max. Rebar Diameter: 40mm

Max. Number of Tying Knots:

 (the battery of full charge)

1200ties (one Ni-MH battery)

Tying Speed: 0.8second/knot

Wire Type: galvanized steel wire

                  Annealed steel wire

Wire Size:

GW of Machine: 2.1kg

Contents:

. 1Pc of Rebar Tying Machine

. 2Pcs of Battery

. 1Pc of Charger

. 4Pcs of Steel Wire Spool

. 1pc of Inner Hexagon Spanner

. 1pc of Sharp Nose Pliers

Packing Size: 408×162×418mm

GW of one set: 7.5kg