Black Color PCB Electronic Potting Silicone HY-215

Electronic potting compoundsilicone （condensationcure type）

RTV―2 silicone rubber,condesationcure,silicone encapsulations,pourable

characteristics:

HY210 and HY215 are condensationsilicone potting compound in two parts with the characteristics of low viscosity,easypouring operation. the safty of potting compound silicone reach EO―ROHSrequirement fully.

Application:

Applying for the surface of PC（Polycarbonate）,PP,ABS,PVC,metal,etc.

Insulation waterproof and bondingof electronic part

Filling for LED,LCD electronicdisplay,circuit board

Outdoor protection for LED screen.

Warm Tips for for PCB Electronic Potting Silicone
 1. Sealing pakage for storage. The mixture should be used up at once to avoid wasting.
 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,

Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopenedpackages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.

Technical Guidelines
1. Pls put part A and B in separate container and stir evenly beforemixing the two
   parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperatureafter
   pouring. It comes to next process when basically cured, and ittakes about 24 hours
   for completely cured.